WINDSHIELD SUN STRIP HELP!!!!!!!!!!!
#1
Join Date: Aug 2009
Location: Bossier City,La
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
WINDSHIELD SUN STRIP HELP!!!!!!!!!!!
so i've been tinting my windows today and i had also gotten a sun strip to put on the windshield i put it up with tape and both my parents keep saying its illegal and it obstructs my vision. i was wondering how far down it should actually go or maybe its fine idk. anybody with a sun strip tell me how far down it goes and if its in your line of sight. pics would be great.
#3
#5
Join Date: Aug 2009
Location: Bossier City,La
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
#11
#12
Join Date: Aug 2009
Location: Bossier City,La
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
#13
#14
Join Date: Aug 2009
Location: Bossier City,La
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
#15
I would not even mess with the windows!!! Just rip off the old tint and take it to a professional..If you were closer I would say come to my shop...It takes me an 1 1/2 hours to do two side windows and a sun strip. To pull both windows would be a huge pain in the A$$ and not needed. Trust me
#16
Join Date: Aug 2009
Location: Bossier City,La
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
yeah i realized that so i said screw it and went ahead and tinted it. this time i got a card and pushed down the water and soap that kept coming up and making spikes at the bottom of the window. its the best on yet except for the little pinch right in the middle of the window. i made it a little smaller though so its not as noticable. how would you get that out?
#18
Join Date: Aug 2009
Location: Bossier City,La
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
#21
#23
#24
If you want to take the window out to tint it it is not hard. Most vehicle all you do is take offthe door panel and you will see the bottom of the glass sitting in the scissor lift mechanism. The window is usually only held in place by two small bolts and they pull out
They are actually usually riveted in, and you have to drill them out and either replace the rivets, or replace them with bolts that will work in function with the mechanism's of the door.
#25