Exterior Semi-Tech General discussion of exterior for the Ford Ranger.

Fender Flare Damaged

Thread Tools
 
Search this Thread
 
  #1  
Old 02-23-2009
mbushnell's Avatar
Member
Thread Starter
Join Date: May 2007
Location: Berkeley Heights, NJ
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Fender Flare Damaged

I have a 2005 Ranger Edge. After washing the truck the last time (1st time in a couple of months due to weather), I noticed that someone had hit me in the right rear fender flare, probably in a parking lot. There are some scrapes in the paint that can probably be rubbed out with compound, but there are a couple of scratches through the paint to the fiberglass underneath.

I have some matching spray paint & primer (the truck is Vermilion Red). I'm guessing that the easiest way to fix this would be to remove the fender flare from the truck so that I can blend out the scratches & touch up the paint, without having to mask off the rest of the truck.

My question is, how easy is it to remove the right rear fender flare off of the truck? I see fasteners along the inside lip of the wheel arch opening. Are these the only fasteners, or are there others hidden somewhere? Are these fasteners reusable or should I get new fasteners to reinstall the fender flare?
 
  #2  
Old 02-23-2009
wvcat's Avatar
Member
iTrader: (4)
Join Date: May 2007
Location: New Cumberland
Posts: 2,044
Likes: 0
Received 3 Likes on 3 Posts
Here's a picture. There is clips all the way up around the flare and usually a screw in the front and back at the bottom.
Name:  Picture041-4.jpg
Views: 186
Size:  172.2 KB
 
  #3  
Old 02-23-2009
mbushnell's Avatar
Member
Thread Starter
Join Date: May 2007
Location: Berkeley Heights, NJ
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by wvcat
Here's a picture. There is clips all the way up around the flare and usually a screw in the front and back at the bottom.
Thanks for the quick reply.

How do you get the fender flare off of the clips, by pushing it up after removing the screws at the bottom front & back? Should the clips be replaced before reinstalling the fender flare?
 
  #4  
Old 02-23-2009
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
Pull to remove flare... replace any that brake..
 
  #5  
Old 02-23-2009
chainfire's Avatar
Member
iTrader: (1)
Join Date: Oct 2007
Location: Mission B.C.
Posts: 3,126
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by Redneckstone
Pull to remove flare... replace any that brake..
X2

Just give them a good ol tug. If it feels like it is going to break, you are probably doing it right.
 
  #6  
Old 02-23-2009
crazymikey's Avatar
Member
iTrader: (2)
Join Date: Nov 2008
Location: your mom
Posts: 4,008
Likes: 0
Received 5 Likes on 5 Posts
Originally Posted by chainfire
X2

If it feels like it is going to break, you are probably doing it right.

First time I've heard how to properly remove something using that method.
 
  #7  
Old 02-23-2009
chainfire's Avatar
Member
iTrader: (1)
Join Date: Oct 2007
Location: Mission B.C.
Posts: 3,126
Likes: 0
Received 3 Likes on 3 Posts
Lol It isn't the first time I have used that method, this time it just worked.
 
  #8  
Old 02-23-2009
mbushnell's Avatar
Member
Thread Starter
Join Date: May 2007
Location: Berkeley Heights, NJ
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Redneckstone
Pull to remove flare... replace any that brake..
O.K.
Judging from the picture, it looks like there are about 10 of those clips on there - right?

If that's the way of removing the flare, maybe I should get some clips in hand before I try to remove the flare.

That way I'll be all set to reinstall the flare once I've repaired it.
 
  #9  
Old 02-23-2009
chainfire's Avatar
Member
iTrader: (1)
Join Date: Oct 2007
Location: Mission B.C.
Posts: 3,126
Likes: 0
Received 3 Likes on 3 Posts
you probably will not need to replace them, I took mine off not one broke, and the truck is 11 yrs old
 
  #10  
Old 02-23-2009
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
same here i took all 4 off and had like 2 clips brake total... rear's you can reach up under and unhook them unlike the fronts... you need to pop off the inner fender christmas tree clips before you take them off the side...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
d0sitmatr
General Ford Ranger Discussion
6
02-09-2010 06:25 PM
tg2006
Exterior Semi-Tech
8
08-28-2008 10:28 PM
chainfire
Exterior Semi-Tech
3
12-15-2007 06:14 AM
Puddle Pirate
Exterior Semi-Tech
8
11-20-2007 09:02 PM
Fazda
Exterior Semi-Tech
11
07-13-2007 08:14 AM



Quick Reply: Fender Flare Damaged



All times are GMT -6. The time now is 03:57 PM.