There's one other person that knows what these are and where they're going..

Next weekend I'm pulling something off, modifying it and adding these, then repainting it with undercoating and putting it back on.....

Here's my teaser... A how to on what I'm doing will follow in about a week.



4-3/16 long
1-15/16 wide
1 inch thick...

Hmmmmmm

 

Sweet wheel chocks!

 

butt plugs...

 

HAHA^^

Nah, something else lol

 

ya sure.. i distinctly remember something on your facebook about butt plug...

 

X2 them Oregon boys always have the free spirit.

BUUUUTTTT.......my guess is shackle mounts for your bumper? Either that or what Stone said.

 

They are going on the rear... That's correct.

But they're not going in the bumper... :-) Keeping the factory look out back.

 

WOAH now. Careful....it's only Portland that's kinda that way. Should be talkin' about SanFran there buddddy.

Does it go on something that starts and ends with an ' H ' ?

 

^^^ Mmmmhmmm....

Should be pretty cool... What do you think Shane?

I found more 1in plate at school so if you want the same size inserts cut, I can cut them... I had fun using our track burner at school tonight for like an hour.

Ended up making these inserts longer than I originally planned after seeing one done. It was too short for me. First ones were 3-5/8in long... Wasn't enough metal left for my liking once the hole would have been drilled so I sprung for some 4-3/16in long pieces and that eased my mind a bit. lol

 

So how are those going to raise your hitch?

 

He plans on lowering it more. It's a unique twist to a mod not many do. NOBODY will have a lowered hitch. He'll be the first I do believe.

Wait...trepaul....are these hitch skid plates?

 

They are drag blocks so he can do this

 

It's not how they're going to raise it... But what they're going to add to it :-)

Love watching the white sparks titanium makes when grinded. lol

 

Hand Job?

 

Shackle mounts?

 

Lol does that end with an "H"?

.......Maybe it does......."Ohhhh yeahhhhh"

 

SHHH run with it

 

Ahahah nice Freddie!

 

Some update on what's going on with those "things" I made up top lol







It's not done but this was all I felt like working on today. It's getting more reinforcement tomorrow and should be done and re painted by thursday. Those shackle mounts I made are going in the sq tube tomorrow. Slotting both sides and they'll slide through. Welded from the front and along the back and ground smooth with 3/8in plate for reinforcement of the sq tube as well as a place for back up light mounts.

 

no pics wtf

 

Hit refresh. I forgot to put the IMG codes in before I clicked post... They're up.

 

ya your gonna need to reinforce those sides you hacked a major amount

 

WEAAAAAAK.

 

That's what you think eh? there was a 3/32nd root opening and welded front and back side for full penetration. Dual shield .045 with 75/25 gas. Trust me, it'll be plenty strong. That's all I was able to do in the 3 hours I had today.

 

gusset that biat like mine dude. remember....only wasted material i had was dust.



before:


after: