Front plate bumper on my '02
#1
Front plate bumper on my '02
Hi everyone,
I haven't posted on this forum before, but I have been here reading alot for awhile now. Lots of cool info here!!! I love this site.
I have been a Ranger owner for 16 years now and on my third that I bought as a salvage vehicle and did the repairs in my free time over 3 years.
I would like to share a couple pics of my truck and bumper I built, with all of you.
Thanks
Brad
I haven't posted on this forum before, but I have been here reading alot for awhile now. Lots of cool info here!!! I love this site.
I have been a Ranger owner for 16 years now and on my third that I bought as a salvage vehicle and did the repairs in my free time over 3 years.
I would like to share a couple pics of my truck and bumper I built, with all of you.
Thanks
Brad
Last edited by KLC; 06-02-2012 at 09:28 PM.
#13
Hi everyone,
I would like to thank all of you again who has given me props for how it turned out!!!! The interest in people wanting to buy one has been very flattering.
I would like to answer some of your questions.
* The plates are a combination of 3/16" and 1/8" in order to save on some weight.
* The bumper weight is around 70 lbs, I do not notice any sag in the suspension.
* As for a price to buy one, i'm working on figuring that out, and will post it here when finalized.
* I used the OEM foglights with the 3 mounting screws
I would like to thank all of you again who has given me props for how it turned out!!!! The interest in people wanting to buy one has been very flattering.
I would like to answer some of your questions.
* The plates are a combination of 3/16" and 1/8" in order to save on some weight.
* The bumper weight is around 70 lbs, I do not notice any sag in the suspension.
* As for a price to buy one, i'm working on figuring that out, and will post it here when finalized.
* I used the OEM foglights with the 3 mounting screws
#14
#18
So after some number crunching......I can sell them for $870 plus shipping. Using Paypal
I can find the cheepest/fastest way to ship if you give me your shipping address. I think if you have access to a loading dock for it to be dropped off, it would help lower the price.
So if anyone is serious about wanting one, send me a PM : )
Thank You
Brad
I can find the cheepest/fastest way to ship if you give me your shipping address. I think if you have access to a loading dock for it to be dropped off, it would help lower the price.
So if anyone is serious about wanting one, send me a PM : )
Thank You
Brad
#24
Hi,
I'm sorry I have been absent from here for awhile.
My family and I had to relocate this last fall to another state so I currently don't have a place to make these. I'm building a new house and shop this summer on some land we purchased. So I should be back up and going this fall/winter.
I'm sorry I have been absent from here for awhile.
My family and I had to relocate this last fall to another state so I currently don't have a place to make these. I'm building a new house and shop this summer on some land we purchased. So I should be back up and going this fall/winter.
#25
Hi,
I'm sorry I have been absent from here for awhile.
My family and I had to relocate this last fall to another state so I currently don't have a place to make these. I'm building a new house and shop this summer on some land we purchased. So I should be back up and going this fall/winter.
I'm sorry I have been absent from here for awhile.
My family and I had to relocate this last fall to another state so I currently don't have a place to make these. I'm building a new house and shop this summer on some land we purchased. So I should be back up and going this fall/winter.
Good luck with the move!
Thread
Thread Starter
Forum
Replies
Last Post
For Sale: Custom plate front bumper -- SC
HighRollerII
OLD - Interior, Exterior, Electrical, & Misc.
15
09-25-2011 02:37 PM
$TiCKY858
Fabrication & Tool Tech
2
03-03-2011 11:31 AM