General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.
Sponsored by:
Sponsored by: DashLynx

Evan's gap guards

Thread Tools
 
Search this Thread
 
  #1  
Old 10-05-2006
shadyluke's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: West Grove, PA
Posts: 2,077
Likes: 0
Received 0 Likes on 0 Posts
Evan's gap guards

I went out to day and bought them. Should look real good. I actually saw how bad it was walking out of the store. I know the lip that I am to screw them to on the top but did you guys secure them to the frame too. Seems like they hang out way far from the frame. Thanks alot!

-Luke
 
  #2  
Old 10-05-2006
got-dirty's Avatar
Member
Join Date: May 2005
Location: Sliding in the skreets
Posts: 3,829
Likes: 0
Received 0 Likes on 0 Posts
man i cant find that stuff at home depot
 
  #3  
Old 10-05-2006
shadyluke's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: West Grove, PA
Posts: 2,077
Likes: 0
Received 0 Likes on 0 Posts
Itz with flooring. Took me a while to find it too. I walked past it twice. They were .99 a piece. Thats cookin cheap
 
  #4  
Old 10-05-2006
zabeard's Avatar
who?
iTrader: (8)
Join Date: Nov 2004
Location: IN
Posts: 26,044
Likes: 0
Received 10 Likes on 10 Posts
i brought mine from the fender down then onto the inside of the frame. i didnt fasten them to the frame incase i need to remove the bed. if you leave them long enough they will stay on the inside of the frame.
 
  #5  
Old 10-05-2006
rangererv's Avatar
Member
Join Date: Mar 2005
Location: Dearborn Michigan
Posts: 4,376
Likes: 0
Received 1 Like on 1 Post
sweet, im glad someone is using them
no secure to the frame either.

any pix?
 
  #6  
Old 10-05-2006
shadyluke's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: West Grove, PA
Posts: 2,077
Likes: 0
Received 0 Likes on 0 Posts
I am gonna put them on tomorrow since we don't have classes. Maybe I can get out to the rock quarry and take some pics. I haven't posted any yet b/c I don't want Zach to hound me about lil tires.......lol. No I still have to fix the rear bumper and then I will get pics up.
 
  #7  
Old 10-05-2006
rangererv's Avatar
Member
Join Date: Mar 2005
Location: Dearborn Michigan
Posts: 4,376
Likes: 0
Received 1 Like on 1 Post
Originally Posted by shadyluke
I haven't posted any yet b/c I don't want Zach to hound me about lil tires.......lol.
hahah thats funny


but true
 
  #8  
Old 10-05-2006
shadyluke's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: West Grove, PA
Posts: 2,077
Likes: 0
Received 0 Likes on 0 Posts
I need wheels before I buy tires. Still working things out.
 
  #9  
Old 10-06-2006
shadyluke's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: West Grove, PA
Posts: 2,077
Likes: 0
Received 0 Likes on 0 Posts
Well they are on. I may get some pics up later today or tomorrow.
 
  #10  
Old 10-06-2006
Join Date: Nov 2005
Location: Charlestown, IN
Posts: 1
Likes: 0
Received 4 Likes on 4 Posts
geeze come on with the pics already!
 
  #11  
Old 10-06-2006
IBLKOUT2's Avatar
Member
Join Date: Jul 2004
Location: Virginia Beach,VA
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
what exactly do these gap guards cover?
 
  #12  
Old 10-06-2006
RockysFord's Avatar
Member
Join Date: May 2005
Location: Columbus Ohio
Posts: 2,782
Likes: 0
Received 0 Likes on 0 Posts
The space between the bottom of the bed and frame for BL'ed trucks

Rocky

I need to make mine still, but ive been doing other things...

Rocky
 
  #13  
Old 10-06-2006
l2en's Avatar
Member
Join Date: Dec 2005
Location: The Keystone State
Posts: 4,521
Likes: 0
Received 0 Likes on 0 Posts
Didn't rangererv figure out a way to close in the rear fender wells? Never had to worry about it on the flareside, they came closed in. I can't believe Ford let's the fenderwells open. It just flings mud all over the underside of the bed and undercarriage. I coulda swore someone made them and I can't find the post anywhere.
 
  #14  
Old 10-06-2006
04lvl2's Avatar
RF Veteran
Join Date: Jun 2004
Location: Palm Bay, FL
Posts: 5,600
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by l2en
Didn't rangererv figure out a way to close in the rear fender wells? Never had to worry about it on the flareside, they came closed in. I can't believe Ford let's the fenderwells open. It just flings mud all over the underside of the bed and undercarriage. I coulda swore someone made them and I can't find the post anywhere.
Yup he has done and we did it to mine as well.
 
  #15  
Old 10-06-2006
jtslmn720's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2004
Location: Kent State, Kent Ohio
Posts: 7,367
Likes: 0
Received 5 Likes on 5 Posts
Originally Posted by l2en
Didn't rangererv figure out a way to close in the rear fender wells? Never had to worry about it on the flareside, they came closed in. I can't believe Ford let's the fenderwells open. It just flings mud all over the underside of the bed and undercarriage. I coulda swore someone made them and I can't find the post anywhere.
i really wanna do that, any ideas of whre you saw it on here?
 
  #16  
Old 10-06-2006
04lvl2's Avatar
RF Veteran
Join Date: Jun 2004
Location: Palm Bay, FL
Posts: 5,600
Likes: 0
Received 0 Likes on 0 Posts
This is the rear



I dont have any pics of the front ones at this time for the rear.
 
  #17  
Old 10-06-2006
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
SMALL TIRE BOY....!!!!!


LOL love ya Luke good luck on installing those!
 
  #18  
Old 10-06-2006
shadyluke's Avatar
Member
Thread Starter
Join Date: Mar 2005
Location: West Grove, PA
Posts: 2,077
Likes: 0
Received 0 Likes on 0 Posts
May be going to a jeep event with obstacle course tomorrow so I may have some pics to put up anyway. So maybe one or two of my truck will show up in them.
 
  #19  
Old 10-07-2006
winks's Avatar
Member
iTrader: (5)
Join Date: May 2005
Location: Jackson, New Jersey
Posts: 4,872
Likes: 0
Received 0 Likes on 0 Posts
Hmm... 99 cents eh? I may have to do this, if my damn 60 hour work weeks ever cease.
 
  #20  
Old 10-07-2006
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by winks
Hmm... 99 cents eh? I may have to do this, if my damn 60 hour work weeks ever cease.
ya but now with all the over time you can afford the gaurds lol
 
  #21  
Old 10-07-2006
winks's Avatar
Member
iTrader: (5)
Join Date: May 2005
Location: Jackson, New Jersey
Posts: 4,872
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Redneckstone
ya but now with all the over time you can afford the gaurds lol
Shut your mouth you devil!!!

CantlistentoZachgottabuyahouse, cantlistentoZachgottabuyahouse, cantlistentoZachgottabuyahouse, cantlistentoZachgottabuyahouse, cantlistentoZachgottabuyahouse...
 
  #22  
Old 10-07-2006
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Likes: 0
Received 8 Likes on 8 Posts
Lol
 
  #23  
Old 10-08-2006
rangererv's Avatar
Member
Join Date: Mar 2005
Location: Dearborn Michigan
Posts: 4,376
Likes: 0
Received 1 Like on 1 Post
Originally Posted by 4X2XLT
i really wanna do that, any ideas of whre you saw it on here?
front
https://www.ranger-forums.com/forum2...ad.php?t=22517
he showed u the rear
 
  #24  
Old 10-08-2006
04lvl2's Avatar
RF Veteran
Join Date: Jun 2004
Location: Palm Bay, FL
Posts: 5,600
Likes: 0
Received 0 Likes on 0 Posts
Here is the front gaurd for the rear.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kevinsranger
Exterior Semi-Tech
6
03-19-2008 10:02 AM
jerrod07
Exterior Semi-Tech
7
11-02-2006 07:50 AM
rangererv
Exterior Semi-Tech
44
02-17-2006 02:43 PM
Ranger1
General Ford Ranger Discussion
10
02-17-2006 08:31 AM
Mason
Suspension Tech
7
08-04-2005 02:29 PM



Quick Reply: Evan's gap guards



All times are GMT -6. The time now is 07:10 PM.