After Build "build" thread...
#1
After Build "build" thread...
Ok so I have had a lot of requests for information about my truck so here it goes......
Most of this stuff is custom fab so I figured this was a good forum to put it in....move it if you want.
Front-
1980 Jeep Wagonner D44
5.13s
ARB
Warn Hubs
Chebbie Flat Tops w/ BTF High Steer Ams
4 link (2 lowers, 1 upper and Panhard)
1.5 .25 wall DOM Links and Steering
FK heim Joints (suck)
BTF Inserts
Rusties 6in Cherokee Lift springs w/ BTF limit straps
13 in travel Rancho 9000 (suck)
Rear-
1997 Exploder 8.8
5.13s
Detroit
Alcan Chebbie Springs (ehh..)
13 in travel Rancho 9000 (suck)
Misc-
Toyota IFS steering Box
Chevy Saginaw pump
Proform Electric Fan (sucks)
37 x 12.50 MTR's
Battery in back
Homemade Rock Sliders and bumpers
Tube frame from firewall forward
I will try to get pics of most of the stuff........
Ok so in the begining it was this....
Body lift, 33s, and 4.56s
More stock wheeling pics here :
http://good-times.webshots.com/album/555256966WGsvER
more to come….
Most of this stuff is custom fab so I figured this was a good forum to put it in....move it if you want.
Front-
1980 Jeep Wagonner D44
5.13s
ARB
Warn Hubs
Chebbie Flat Tops w/ BTF High Steer Ams
4 link (2 lowers, 1 upper and Panhard)
1.5 .25 wall DOM Links and Steering
FK heim Joints (suck)
BTF Inserts
Rusties 6in Cherokee Lift springs w/ BTF limit straps
13 in travel Rancho 9000 (suck)
Rear-
1997 Exploder 8.8
5.13s
Detroit
Alcan Chebbie Springs (ehh..)
13 in travel Rancho 9000 (suck)
Misc-
Toyota IFS steering Box
Chevy Saginaw pump
Proform Electric Fan (sucks)
37 x 12.50 MTR's
Battery in back
Homemade Rock Sliders and bumpers
Tube frame from firewall forward
I will try to get pics of most of the stuff........
Ok so in the begining it was this....
Body lift, 33s, and 4.56s
More stock wheeling pics here :
http://good-times.webshots.com/album/555256966WGsvER
more to come….
#3
Then it went under the knife.....
On its way in....
More SAS pics : http://good-times.webshots.com/album/555255138fsslCQ
more to come....
On its way in....
More SAS pics : http://good-times.webshots.com/album/555255138fsslCQ
more to come....
#8
#11
And pics of this weekends project....
Here is a link to all the pics....
http://community.webshots.com/user/ShoNuff82
I have pictures of the frame and front bumper build but the web site is down. As soon as it is back up i will post those. Thats probably my favorite part of the truck
Thanks for looking!
Chris
Here is a link to all the pics....
http://community.webshots.com/user/ShoNuff82
I have pictures of the frame and front bumper build but the web site is down. As soon as it is back up i will post those. Thats probably my favorite part of the truck
Thanks for looking!
Chris
#14
#15
#16
Member
iTrader: (7)
Join Date: Sep 2006
Location: Minneapolis, MN
Posts: 1,867
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ShoNuff82
Almost all of those picture were takin in the U.P......eh
These picture is great. Can't tell most of the wheelers up there run Jeeps can ya? Haha...
Also, I thought someone was saying you had tube framed the entire front end. It looks like that in the flex pictures, but I'm guessing you did that after you did the SAS. Got any pictures of that?
Originally Posted by ShoNuff82
I have pictures of the frame and front bumper build but the web site is down. As soon as it is back up i will post those. Thats probably my favorite part of the truck
Last edited by Rooks; 11-02-2006 at 07:45 AM.
#19
Love that front bumper and the coil spring setup!
Could you get some better shots of the 4-link? I like the idea of using 1 upper and a panhard... that is clever.
EDIT... I found some more pictures, but I'd like a shot of the setup perhaps from the underside of the truck looking towards the front from under the cab? Does your panhard bar ever hit your oil pan? It looks precariously close in one picture.
Could you get some better shots of the 4-link? I like the idea of using 1 upper and a panhard... that is clever.
EDIT... I found some more pictures, but I'd like a shot of the setup perhaps from the underside of the truck looking towards the front from under the cab? Does your panhard bar ever hit your oil pan? It looks precariously close in one picture.
#20
Originally Posted by Gearhead61
Love that front bumper and the coil spring setup!
Could you get some better shots of the 4-link? I like the idea of using 1 upper and a panhard... that is clever.
EDIT... I found some more pictures, but I'd like a shot of the setup perhaps from the underside of the truck looking towards the front from under the cab? Does your panhard bar ever hit your oil pan? It looks precariously close in one picture.
Could you get some better shots of the 4-link? I like the idea of using 1 upper and a panhard... that is clever.
EDIT... I found some more pictures, but I'd like a shot of the setup perhaps from the underside of the truck looking towards the front from under the cab? Does your panhard bar ever hit your oil pan? It looks precariously close in one picture.
#25