Suspension Tech General discussion of suspension for the Ford Ranger.

Found a good deal on new lower ball joints

Thread Tools
 
Search this Thread
 
  #1  
Old 05-09-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
Found a good deal on new lower ball joints

If you have a newer Ranger and need lower ball joints, this looks pretty good.

http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT

Edit: Relisted here: http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW

I bought 2 sets since I figure with the 35's and t-bar crank I'll be wearing them out.

The only thing is they come without the snap ring and castle nut, but you can reuse your old ones. No cotter pin either, but that's pennies.

The price, shipped, is about $25.00 for a pair -- not bad. I asked for and got a concession on shipping buying two sets at once so my price is even lower.

Just thought I pass that along. I need ball joints because I tore the boots over mine putting on the spindles.
 

Last edited by n3elz; 05-11-2005 at 06:54 PM.
  #2  
Old 05-09-2005
Rand's Avatar
Member
Join Date: May 2004
Location: Barberton,Ohio
Posts: 1,189
Likes: 0
Received 0 Likes on 0 Posts
link dont work for me
 
  #3  
Old 05-09-2005
shadyluke's Avatar
Member
Join Date: Mar 2005
Location: West Grove, PA
Posts: 2,077
Likes: 0
Received 0 Likes on 0 Posts
no workie here either
 
  #4  
Old 05-09-2005
FoMoCoFiddy's Avatar
Member
Join Date: May 2004
Location: Smackdownville Tx
Posts: 4,508
Likes: 0
Received 1 Like on 1 Post
Link dont work , you suck at the internet.
 
  #5  
Old 05-09-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
No, ebay is DOWN. The link is fine. Most things are not available over there right now. Go log on and see what you can do -- not much till they fix it. There's a message on the General Announcements Board on eBay -- IF you can get to it!

Here's the text of the announcement:

******
Date: 05/09/05 Time: 0812 PM PDT

We are aware the site is temporarily unavailable. We're aware of this issue and are working to fix it as quickly as possible.

Thank you for your patience,
eBay
 
  #7  
Old 05-09-2005
FoMoCoFiddy's Avatar
Member
Join Date: May 2004
Location: Smackdownville Tx
Posts: 4,508
Likes: 0
Received 1 Like on 1 Post
Originally Posted by n3elz
No, ebay is DOWN. The link is fine.
Ever consider, that the site doesnt go down just when you look at it, maybe JUST MAYBE we looked at it while it was up, and it didnt work. It works now... Big Crybaby, you can be wrong ONCE in your life John.. haha
 
  #8  
Old 05-10-2005
FORZDA's Avatar
Member
Join Date: Jul 2004
Location: Mississippi
Posts: 1,671
Likes: 0
Received 0 Likes on 0 Posts
Will these fit the mazdas as well?
 
  #9  
Old 05-10-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
Yes. The part number for both front ends is the same, I do believe. You can verify that easily by going to a site that sels them online, and looking up joints for a Ranger and a Mazda.

The guy shipped me two sets for $10 total shipping, so I got two sets for $40.
 
  #10  
Old 05-10-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by FoMoCoEdge
Ever consider, that the site doesnt go down just when you look at it, maybe JUST MAYBE we looked at it while it was up, and it didnt work. It works now... Big Crybaby, you can be wrong ONCE in your life John.. haha
Ha ha! I'm wrong a LOT, Leo -- just never when I talking to you!
 
  #11  
Old 05-10-2005
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
Just bought some. Thanks for the tip, John. Deal!
 
  #12  
Old 05-10-2005
Wowak's Avatar
Member
Join Date: May 2004
Location: Merritt Island, FL
Posts: 2,223
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by FoMoCoEdge
Ever consider, that the site doesnt go down just when you look at it, maybe JUST MAYBE we looked at it while it was up, and it didnt work. It works now... Big Crybaby, you can be wrong ONCE in your life John.. haha
Ever consider that your momma told you that if you don't have anything nice to say, you shouldn't say anything at all?
 
  #13  
Old 05-10-2005
Pinecone's Avatar
Member
Join Date: Jun 2004
Location: Fayetteville, NC
Posts: 1,966
Likes: 0
Received 0 Likes on 0 Posts
I may have to buy some:) They are only the size of a thumbtack?
 
  #14  
Old 05-10-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
???? ^^^^^

Thumbtack? I don't understand, lol.

They are about the size of your fist, more or less.
 
  #15  
Old 05-10-2005
Pinecone's Avatar
Member
Join Date: Jun 2004
Location: Fayetteville, NC
Posts: 1,966
Likes: 0
Received 0 Likes on 0 Posts
I was looking at the pic and they looked smaller than the thumbtack, lol.
 
  #16  
Old 05-10-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
Above them are the plastic covers that protect the boot and threads in shipping -- maybe that's what you're seeing.
 
  #17  
Old 05-10-2005
FoMoCoFiddy's Avatar
Member
Join Date: May 2004
Location: Smackdownville Tx
Posts: 4,508
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Wowak
Ever consider that your momma told you that if you don't have anything nice to say, you shouldn't say anything at all?

No, she never told me that. You know there are different mothers in the world.

And im sure John knows what i said was me just messing with him, remove stick from anus. haha

When need a j/k smiley.
 
  #18  
Old 05-10-2005
Pinecone's Avatar
Member
Join Date: Jun 2004
Location: Fayetteville, NC
Posts: 1,966
Likes: 0
Received 0 Likes on 0 Posts
Aha:) Well I hope they sell these more often, since there is only a few hours left and i have no dinero to spend on these at the moment.
 
  #19  
Old 05-10-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by Pinecone
Aha:) Well I hope they sell these more often, since there is only a few hours left and i have no dinero to spend on these at the moment.
He'll probably relist them, but why don't you put it in your watch list so you have a link, and email him when you are ready to buy. His name is Paul and he seems quite amenable to doing business.

And yes, I knew Leo was kidding -- well, I mean I kinda figured it out after I read it a second time through my drying tears...
 
  #20  
Old 05-10-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
I just talked to Paul, and he has an incredibly large supply of them. Unless he sells them in bulk to unload them, he'll have some for a bit. I suggest anyone who even THINKS they're going to need ball joints jump on this -- this price doesn't come around much.
 
  #21  
Old 05-10-2005
Join Date: Jun 2004
Location: Exit 105 New Jersey
Posts: 2,409
Likes: 0
Received 0 Likes on 0 Posts
thanks for the heads up John
to tell the truth an extra ball joint should really be carried off road
it is a likely part to break (especially climbing rocks or obstructions) and trail repairable if you have a spare and tools
 
  #22  
Old 05-11-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
Okay, the old auction ran out, but they are now listed here: http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW
 
  #24  
Old 05-11-2005
n3elz's Avatar
RF Veteran
Thread Starter
Join Date: Jun 2004
Location: Kennett Square, PA
Posts: 10,623
Likes: 0
Received 4 Likes on 4 Posts
25 bucks a pair? Where do you get them?

And my stock ones have held up well. They are not "garbage" and I'm not sure why you would say that -- they are also used on heavier trucks than ours and stand up well. Mine need replacement because I tore the boots -- other than that I wouldn't need to replace them.

I have not seen the HD Moog's ANYWHERE for $25 a pair -- so tell me where you shop, thanks.
 


Quick Reply: Found a good deal on new lower ball joints



All times are GMT -6. The time now is 09:34 PM.