need to powerwash under the hood
#1
#2
#3
#7
#8
Try not to spray (with high pressure) the alternator, coil pack, fusebox/electrical connectors and rubber hoses (rad hoses, vac hoses and T-connectors). You can spray everything down but it's generally best not to use high pressure on anything if you can help it. Spray the engine down with tire degreacer or Simple Green and then rinse it down.
#10
You do not want to start w/a warm engine.
I like to spray grease lightening all over it, let it set for 5 mins, then spray it down, but do not let the hose stand still in one spot. Move it around considtenly. Avoid a lot of water on the alternator and coil. Other then that I've had no problems. Using a power washer is fine, just do not use full power. A low setting is fine.
#12
#13
Member
iTrader: (1)
Join Date: Oct 2006
Location: Virginia Beach, VA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
You do not want to start w/a warm engine.
I like to spray grease lightening all over it, let it set for 5 mins, then spray it down, but do not let the hose stand still in one spot. Move it around considtenly. Avoid a lot of water on the alternator and coil. Other then that I've had no problems. Using a power washer is fine, just do not use full power. A low setting is fine.
I like to spray grease lightening all over it, let it set for 5 mins, then spray it down, but do not let the hose stand still in one spot. Move it around considtenly. Avoid a lot of water on the alternator and coil. Other then that I've had no problems. Using a power washer is fine, just do not use full power. A low setting is fine.
Thread
Thread Starter
Forum
Replies
Last Post