buying a body lift
#1
#3
quote from summit's description of the kit....
link to kit: http://store.summitracing.com/partde...5&autoview=sku
Says 98+, so it'll work on ALL 98+ trucks. There may be issues with your fuel filler extentions, like the breather on 05 and older trucks is like 5/16....but on Marie's 08, the breather/vent tube was 1/4"....keep that in mind...you may need to make a run to home depot. IF you even need to extend it. some trucks theres enough slack...others dont have enough and require the extention.
OH...and why not....SUMMIT's instructions...which by the way...are EXACTLY like the PA instructions minus the pictures. Parts list is the same too. Now i'm thinkin' i shouldve just bought the Summit kit! lol....
http://static.summitracing.com/globa...00%282%291.pdf
Originally Posted by Summit Racing's product description
5 - It may be necessary to drill front two body bushing sleeves out to 1/2 in. for new bolt clearance.
6 - Front and rear bumper brackets are included in this kit.
7 - Modifications to the front frame horns are required to raise the front bumper, using the bumper brackets included.
15 - Steering extension included.
20 - Manual transmission models require part PRA-3700 shift extension (Mazda transmission only).
21 - Rear bumper brackets are to enhance appearance; bumper cannot be used for towing.
24 - Gap Guards available and sold separately for this application.
6 - Front and rear bumper brackets are included in this kit.
7 - Modifications to the front frame horns are required to raise the front bumper, using the bumper brackets included.
15 - Steering extension included.
20 - Manual transmission models require part PRA-3700 shift extension (Mazda transmission only).
21 - Rear bumper brackets are to enhance appearance; bumper cannot be used for towing.
24 - Gap Guards available and sold separately for this application.
Says 98+, so it'll work on ALL 98+ trucks. There may be issues with your fuel filler extentions, like the breather on 05 and older trucks is like 5/16....but on Marie's 08, the breather/vent tube was 1/4"....keep that in mind...you may need to make a run to home depot. IF you even need to extend it. some trucks theres enough slack...others dont have enough and require the extention.
OH...and why not....SUMMIT's instructions...which by the way...are EXACTLY like the PA instructions minus the pictures. Parts list is the same too. Now i'm thinkin' i shouldve just bought the Summit kit! lol....
http://static.summitracing.com/globa...00%282%291.pdf
Last edited by Fx4wannabe01; 02-16-2009 at 02:44 AM.
#5
#6
#7
#8
#13
#17
#18
#19
Member
iTrader: (5)
Join Date: Sep 2008
Location: athens, Al
Posts: 2,245
Likes: 0
Received 0 Likes
on
0 Posts
Make sure you undo the clip that holds the shifter link cable. It easier to get to from under the truck on the drivers side towards the bottom of the firewall! You can remount it later the clip should slide on the cable. And on the transfer case connector dont unplug it just pop the trees out the brackets and let it hang but go back and reconnect if you can.
#24
Member
iTrader: (5)
Join Date: Sep 2008
Location: athens, Al
Posts: 2,245
Likes: 0
Received 0 Likes
on
0 Posts
From what i hear not too bad may need a lil trimmin and t-bar crank.
https://www.ranger-forums.com/forum2...ad.php?t=20047
https://www.ranger-forums.com/forum2...ad.php?t=20047
#25
From what i hear not too bad may need a lil trimmin and t-bar crank.
https://www.ranger-forums.com/forum2...ad.php?t=20047
https://www.ranger-forums.com/forum2...ad.php?t=20047