Spark plug broken in head
#1
#2
RF Veteran
iTrader: (1)
No, inside will blow out fairly fast possibly damaging something on the way out.
Good read here: http://www.federalmogulmp.com/en-US/...wist%20Off.pdf
So you will need to use a square "easy out" to remove it, the round ones can be used if thats all you have or can get
You may need to pull the intake to get the room to work but it for sure needs to come out.
See if you can drill the insulator and pull it out with a smaller easy out
Good read here: http://www.federalmogulmp.com/en-US/...wist%20Off.pdf
So you will need to use a square "easy out" to remove it, the round ones can be used if thats all you have or can get
You may need to pull the intake to get the room to work but it for sure needs to come out.
See if you can drill the insulator and pull it out with a smaller easy out
Last edited by RonD; 09-17-2016 at 05:51 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Ksnee1
General Ford Ranger Discussion
1
01-07-2016 08:58 PM
TomJones
General Technical & Electrical
7
12-19-2014 04:25 PM