New Tint and New dashlights!
#1
New Tint and New dashlights!
So I posted a thread a week ago ablout my new tint. I just got the pics from my friend and here they are.
I did 35 on the door windows, and 20 on the rear
These Lights are from Autolumination.com. They are the Matrix 194 Bulbs with the Leds on the side and the top.
I did 35 on the door windows, and 20 on the rear
These Lights are from Autolumination.com. They are the Matrix 194 Bulbs with the Leds on the side and the top.
#5
Nah, it wasn't bad.... the manual says taht for the 94 and older, all you do is pop the vinyl off and unscrew the dash cluster. Make sure you remove your headunit. Also, the screws are Torx, but you can also use a socket to remove them (i think 8MM). you may also have to remove the speedo cable from the rear of the Tranny. Otherwise, Straight forward. Also, the green color that comes from the dash... it is impregnated into the vinyl plastic of the dash cluster. you CAN NOT CHANGE IT, unless you buy an after market cluster. The Speedo cable on the back of the cluster was a pain in the A$$ but we got it, and you HAVE to make sure that you CLIP the plastic clip, or it will come out like it did on me.
#7
Originally Posted by RockysFord
i would have went darker on the tint.........im doing 15% all the way around when i get mine redone....lights look good
#10
#13
#14
RF Veteran
iTrader: (6)
Join Date: Aug 2004
Location: nova
Posts: 5,061
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 94greenmachine
Yeah, but while i was waiting on my truck to get done, 3 different people walked in and had their's removed because the State Police pulled them for their tint. It sucks. Oh well, I really wanted darker, but I don't have the money as of yet to pay fines.
But yeah, VA is super strict. I am suprised i never got pulled
looks good though
#16
Originally Posted by 94greenmachine
Nah, it wasn't bad.... the manual says taht for the 94 and older, all you do is pop the vinyl off and unscrew the dash cluster. Make sure you remove your headunit. Also, the screws are Torx, but you can also use a socket to remove them (i think 8MM). you may also have to remove the speedo cable from the rear of the Tranny. Otherwise, Straight forward. Also, the green color that comes from the dash... it is impregnated into the vinyl plastic of the dash cluster. you CAN NOT CHANGE IT, unless you buy an after market cluster. The Speedo cable on the back of the cluster was a pain in the A$$ but we got it, and you HAVE to make sure that you CLIP the plastic clip, or it will come out like it did on me.
#17
#18
#19
Originally Posted by n3elz
Yes, it looked surprisingly good and I like your results.
The only thing I like about the white light is I could use multiple colors on the dash overlay on the newer ones. I may have to try some of the those really well "spread" LED lamps in white at some point.
The only thing I like about the white light is I could use multiple colors on the dash overlay on the newer ones. I may have to try some of the those really well "spread" LED lamps in white at some point.
#20
#21
Thread
Thread Starter
Forum
Replies
Last Post
chopperchip
General Technical & Electrical
2
07-14-2014 10:48 AM
joshtank
Exterior Semi-Tech
1
08-30-2009 07:11 PM
FMD
Interior Semi-Tech
4
07-06-2007 12:38 PM