my ranger
#1
my ranger
I just got a plow for my 04 ranger xlt and was wondering if there is anything i should do to help the suspension in the front or engine to help out with fast wear of either, just did all four ball joints and shocks with monroe sensatrack. should i get beefier shocks with the plow on it sags alittle in the front
#2
Old Guy User…
iTrader: (12)
To me the OEM springs and shocks are just enough for what they have to do, hold a stock vehicle up.
IMHO… you need heavier spring and shock to handle the extra weight of the plow and frame work.
See if there is a variable rate coil spring to fit your needs and extra weight.
I know when you add an HD Front bumper and winch the front coils start to **** after a while so think on it, figure out the added weight and contact a spring company.
Also get their suggestion on the correct shocks to use with their springs.
IMHO… you need heavier spring and shock to handle the extra weight of the plow and frame work.
See if there is a variable rate coil spring to fit your needs and extra weight.
I know when you add an HD Front bumper and winch the front coils start to **** after a while so think on it, figure out the added weight and contact a spring company.
Also get their suggestion on the correct shocks to use with their springs.