Yeah, I didn't need the bolts thankfully.
It was easier than I expected. Sorry I didn't get any pics annguyen1981.
He's working on a 2002, but it's the same for your 03.
I don't have power tools, so I had to break the axle nut loose manually. I had to remove the wheel, pull out the center dust cap, replace the wheel, lower it then break the nut loose. My 18" breaker bar was plenty, it came off with a little effort.
Also, it was a little tight getting my torque wrench on the knuckle to hub bolts. Luckily I had enough extensions to get the clearance I needed. Crow's foot head would work too, but then you have to figure the math to get the proper torque settings.
It's still fresh in my head, so if you have any questions, go ahead and ask.