I am installing an electric tailgate lock on my 2008. I want to hook it up to the passenger side lock wiring so that it will unlock when I press the buttonont he FOB twice just like the passenger door works. Question is what color wires do I need to tap into, anyone know?

Thanks

George

 

2007/2008 door harness connector

white/violet (pin 14)
gray/violet (pin 3)

If the lock logic turns out backwards after you hook it up, just swap the wires.

 

Thanks for the help.

 

Just a heads up. That connector has some duplicate color codes, so be sure to verify using the pin #'s given.

 

Do you know where that connector is located. what it is plugged into?

Thanks again.

George

 

It should be under the PS kick panel connecting the dash harness to the door harness that goes through the accordion boot to the door. Maybe about 1 1/2" square, 16 pin positions total.

 

Thanks Bob. I will take a look tonight as I have the KP out as well as the door panel.

 

Finally got around to making the final hookup. You were dead nuts on wire colors and pins.

Thanks again for your help.

George