i wanted to build a center consol to put my amp and a sub and 1 lcd screen in it..i can prolly build it =/ but anyway..my question is..how do i apply the fiberglass stuff..like the rezen and stuff..what do i need?

 

http://www.fiberglassforums.com/showthread.php?t=3

check around that forum for more info

 

i no how to fiberglass, but i wont be able to do it for you..... i can tell you everything to do if u want... but that will be like a full page of stuff!

 

i dont know, but, when you decide to try let me know...i want to see how it works for some future projects...

 

Make a female mold for each shape you need. Then you do a lay-up with the glass and resin. When the part(s) are done, trim to fit, assemble, and glass them together into an assembly.

To make the female mold, it's typical to make a male sample part (prototype) from wood, or plaster, or clay or whatever. Then you make the female tool from the sample part.

 

Try these links, although most are mainly about custom audio boxes, the same can be applied to a custom console for any purpose:

http://www.garbled.net/tim/fiberglass.html

http://www.caraudiohelp.com/how_to_f...fiberglass.htm

http://www.ajquick.com/cars/tutorials/fiberglass.php