JBA IS LOOKING FOR 08 Rangers
#1
JBA IS LOOKING FOR 08 Rangers
3.0 and 4.0L engine applications for R&D work
Trucks must be in San Diego or at the most in SoCal - we will need the vehicle for at minimum a day. So long as nothing has changed from 07 it shouldnt take more than a day for us to verify fitment of our current header and exhaust systems on these trucks. If anything has changed we will need the vehicle for the week, so keep that in mind.
Contact me on here or directly and we can get everything worked out, you will be compensated for your time.
Brad Harvey
bharvey@jbaheaders.com
80-837-3377 x125
Trucks must be in San Diego or at the most in SoCal - we will need the vehicle for at minimum a day. So long as nothing has changed from 07 it shouldnt take more than a day for us to verify fitment of our current header and exhaust systems on these trucks. If anything has changed we will need the vehicle for the week, so keep that in mind.
Contact me on here or directly and we can get everything worked out, you will be compensated for your time.
Brad Harvey
bharvey@jbaheaders.com
80-837-3377 x125
Last edited by brad@JBAHEADERS; 10-15-2007 at 10:04 AM.
#6
Once we know what is involved with the 08's we will compensate you for your time with your vehicle with JBA headers, or an exhaust system depending on what we use your vehcile for - hopefully we can kill 2 birds with one stone but there is the issue of EGR location on each engine, the quicker we can verify fitment - the quicker we can go to market for the 08 guys.
#8
Thread
Thread Starter
Forum
Replies
Last Post
zabeard
General Ford Ranger Discussion
12
01-09-2005 08:47 PM