Modded 06 Ranger fender emblems installed
#27
Originally Posted by rwenzing
The 06 emblems come in two styles. One says "RANGER" in the top panel with "XLT" in the panel underneath. Non-XLT's have a similar Ranger emblem with a blank lower panel. I used the non-XLT style and added a reduced-scale "Level II" sticker.
For anyone who is wondering, the alignment post spacing is exactly the same between the emblems on the 06 and prior years.
Many thanks to Aftermarket for posting the part numbers previously:
Your welcome!
Mine should be here next week, will post pics of the finished product.
#32
#33
#35
#36
Originally Posted by Strider0O0
hey Bob, when you get a chance, could you maybe measure that lower bar (where Level II is). i thought of a sticker to put down there, but was just wondering how long to make it. thanks!
Overall - 8 7/16" x 1 3/4"
Upper Panel - 8 7/16" x 1 1/4"
Lower Panel - 8 7/16" x 7/16"
(The numbers don't add up because there is a 1/16" separator between the upper and lower panels.)
The sticker that I used is one that I already had on hand. It is about 3/16" high. IMO, 1/4" high would have been best and 5/16" would be the most you could go without crowding the top and bottom edges of the lower panel.
#46
Originally Posted by telemaster1952
that is sweet looking
thats on the 06 lvl 2?
thats on the 06 lvl 2?
http://jusnesmodified.com/store/inde...th=155_184_207
I helped you out Bob..
#47
Originally Posted by telemaster1952
that is sweet looking
thats on the 06 lvl 2?
thats on the 06 lvl 2?
Good lucks!