The diamond plate looks fine..... Good bed rail and tail gate protection.
My question is why are you running the two Wilson truck antennas?
Since the whip and load coil are above the cab... your RX/TX should be quite good with one....
CoPhasing antennas is generally what truckers do; since their RX/TX is directional with only one. This is caused by the trailer shielding the signals on one side of the truck.
Antennas mounted that close generally dont take full advantage of the CoPhasing.... To increase the performance of the CoPhasing; the antennas should be at least 10' apart.
2000 Ranger 4.0L 4dr 5 spd 4x4 w/ ORP
Modifications: 265/75R16 BFG AT KO, Detroit TruTrac l/s, K&N FIPK, 66mm BBK TB, Gibson 2.5" catback exhaust, BAMA SCT Tuner, Underdog Performance 25% underdrive pulley, James Duff Traction Bars, Taylor 8mm sparkplug wires
Future Mods: JBA Headers