New pics of bumper build
#29
Join Date: Oct 2007
Location: Corvallis, OR/Seattle, WA
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
i am having the winch on a hitch compatible plate so it will only be on the front when i need it.
the front plate is 33 inches accross, 7 inches tall, and the middle after the step down is 5 inches tall. the step down is a 45 degree angle exactly.
anymore deminsions needed?
do you want me to make a pic of it with labels for the deminsions?? would that help anybody???
the front plate is 33 inches accross, 7 inches tall, and the middle after the step down is 5 inches tall. the step down is a 45 degree angle exactly.
anymore deminsions needed?
do you want me to make a pic of it with labels for the deminsions?? would that help anybody???
#36
Join Date: Oct 2007
Location: Corvallis, OR/Seattle, WA
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
did some more cutting today, since the steel is 1/4 by 12 inch tall channel. i am cutting all the front plates so that i can 1 channel edge facing down which will give the bumper alot of support! (instead of having to reinforce more)
using a 10 inch table saw with a metal cutting blade. SMOOTH AS BUTTER!!
ill get more pics if you guys want???
using a 10 inch table saw with a metal cutting blade. SMOOTH AS BUTTER!!
ill get more pics if you guys want???
#38
did some more cutting today, since the steel is 1/4 by 12 inch tall channel. i am cutting all the front plates so that i can 1 channel edge facing down which will give the bumper alot of support! (instead of having to reinforce more)
using a 10 inch table saw with a metal cutting blade. SMOOTH AS BUTTER!!
ill get more pics if you guys want???
using a 10 inch table saw with a metal cutting blade. SMOOTH AS BUTTER!!
ill get more pics if you guys want???
#40
Join Date: Oct 2007
Location: Corvallis, OR/Seattle, WA
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
pics of side plates
front plate. w/ middle not cut out (saw is to worn down and i cant reach with it. so i have to get a new blade before i cut it)
this is how clean the cut is!!!
i have left the channel on the bottom of each front plate for support!!
pic of front plate w/ channel
CB antenna mount i made yesterday
MORE COMMING!!!
front plate. w/ middle not cut out (saw is to worn down and i cant reach with it. so i have to get a new blade before i cut it)
this is how clean the cut is!!!
i have left the channel on the bottom of each front plate for support!!
pic of front plate w/ channel
CB antenna mount i made yesterday
MORE COMMING!!!
#46
Join Date: Oct 2007
Location: Corvallis, OR/Seattle, WA
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
project kinda stalling... i had to get more steel. fortunatley i got a BIG piece and i mean BIG!!! according to mike (the guy who gets me it free from work says ITS SCRAP!) 14 inch wide, 7 foot long piece of 1/4 inch with 11/16 channeling!!!! its weighs like 200 lbs. i only need like 6x6 inches of it!! haha
also, he got me 2 2x2 6 ft square tubing for the back bumper and some other thinner scrap. so ill post some pics tommorw
i also hooked up a hitch to build into my rear bumper for 20 bucks off craigslist.
also, he got me 2 2x2 6 ft square tubing for the back bumper and some other thinner scrap. so ill post some pics tommorw
i also hooked up a hitch to build into my rear bumper for 20 bucks off craigslist.
#48
Join Date: Oct 2007
Location: Corvallis, OR/Seattle, WA
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
my bumper is SOOOO SICK!!! project stalled for about 3 weeks, but last couple of days, i have become a slave!!
I DO HAVE AN EXCUSE FOR WHY ITS TAKING ME SOO LONG!!!
i got a 3 in bl, and some 35x14.5 TSL Super Swampers, and an 8000 lb winch
and ive been wheelin a ton!!! so... yah!
im at school now, so i have no pics, but when i get home i will post em up!!
i cut welded and bolted up the entire rear bumper, (gotta weld on D-Ring Mounts)
my friend is borrowing his Wire Feed MIG Welder from his brother so we have been messin around alot with it.
the front bumper is so sick lookin!! 3 front plates welded and one top piece on, gotta cut some more steel.
weve been puttin down fat welds on each side, and then grinding it down smooth..
also, i hooked up a sandblaster from another friend, and im gona play with that later to get all the rust offf...
still need to find a place to get powder coating done...
I DO HAVE AN EXCUSE FOR WHY ITS TAKING ME SOO LONG!!!
i got a 3 in bl, and some 35x14.5 TSL Super Swampers, and an 8000 lb winch
and ive been wheelin a ton!!! so... yah!
im at school now, so i have no pics, but when i get home i will post em up!!
i cut welded and bolted up the entire rear bumper, (gotta weld on D-Ring Mounts)
my friend is borrowing his Wire Feed MIG Welder from his brother so we have been messin around alot with it.
the front bumper is so sick lookin!! 3 front plates welded and one top piece on, gotta cut some more steel.
weve been puttin down fat welds on each side, and then grinding it down smooth..
also, i hooked up a sandblaster from another friend, and im gona play with that later to get all the rust offf...
still need to find a place to get powder coating done...
#49
Join Date: Oct 2007
Location: Corvallis, OR/Seattle, WA
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
#50
Join Date: Oct 2007
Location: Corvallis, OR/Seattle, WA
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts