General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.
Sponsored by:
Sponsored by: DashLynx

No gas gage, gas smell by the bed, pictures

Thread Tools
 
Search this Thread
 
  #1  
Old 01-22-2007
CadiLLacPimPin's Avatar
Member
Thread Starter
Join Date: Nov 2006
Location: Charlottesville, VA
Posts: 239
Likes: 0
Received 1 Like on 1 Post
No gas gage, gas smell by the bed, pictures

The gas gage for the front tank has apperently not worked for many years, according to the previous owner of my truck. It was fine with me, its got two tanks, one runs out, flip the switch and head to a gas station, fill it up and run the other tank til its empty. Repeat. That didnt bother me. What did, was that I recently started smelling gas every time I walked up to/past the truck.
Thats a big problem... so I dropped the tank to find out why.

Name:  yeeehaw2.jpg
Views: 376
Size:  53.0 KB
Name:  yeehaw.jpg
Views: 385
Size:  25.4 KB
Name:  rust2.jpg
Views: 382
Size:  45.2 KB
That could be the problem... Not too clear in the picture but it looked like pile of rusty corn flakes.
Name:  rust.jpg
Views: 369
Size:  35.7 KB Hmmm... 2 rusty contacts, and a dry-rotted wiring connector...
There was also a crack in the float on the sender...
Name:  sender.jpg
Views: 381
Size:  31.6 KB According to Ford, these were discontinued in 1999... No parts store here has been able to find an aftermarket replacement either... So I have to clean it up and re-use it. Simple enough. Its actually not in too bad shape.
 
  #2  
Old 01-22-2007
HighRollerII's Avatar
RF Veteran
iTrader: (4)
Join Date: Jun 2004
Location: Charleston, SC
Posts: 10,073
Likes: 0
Received 4 Likes on 4 Posts
eww that joker looks worn out right there
 
  #3  
Old 01-22-2007
CadiLLacPimPin's Avatar
Member
Thread Starter
Join Date: Nov 2006
Location: Charlottesville, VA
Posts: 239
Likes: 0
Received 1 Like on 1 Post
Forgot to mention its 23 years old...
 
  #4  
Old 01-22-2007
Join Date: Jan 2006
Location: Toledo, OH
Posts: 350
Likes: 0
Received 0 Likes on 0 Posts
i had a 90 F-150 Ext Cab that did the same thing.....front tank didnt work for the longest....change the filter changed the lines changed the pump....then one day i decided to jump some railroad tracks in michigan. after that it worked go figure. mine always smelled like gas. maybe the fact that i paid $100.0 bucks for the truck and drove it almost two years b4 tradin it in on my ranger......funny think is mathews ford in oregon, ohio gave me $2500.00 bucks.....awesome.
 
  #5  
Old 01-23-2007
bryanjints's Avatar
Member
iTrader: (1)
Join Date: Dec 2005
Location: Mount Holly, NJ
Posts: 1,857
Likes: 0
Received 1 Like on 1 Post
thats some serious funk right there. Get that emptied and get a new one in there asap.
 
  #6  
Old 01-23-2007
5speedin2.3's Avatar
Member
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
his tank doesn't look that bad. move to michigan and look under a truck thats 23 years old.. that is... if you can find one...

i think this is the same thing thats wrong with my 92, the stupid gauge quit working a few years ago and i don't feel like messing with it..
 
  #8  
Old 01-23-2007
Join Date: Dec 2005
Location: Nowhere
Posts: 3,481
Likes: 0
Received 0 Likes on 0 Posts
those dual tanks never seem to completely work right anymore on any truck i hear aboug
 
  #9  
Old 01-23-2007
CadiLLacPimPin's Avatar
Member
Thread Starter
Join Date: Nov 2006
Location: Charlottesville, VA
Posts: 239
Likes: 0
Received 1 Like on 1 Post
Time to snag a FMS 155LPH pump out of a Stang and mod it to fit. When I put the v8 in my 84 it was an easy task. I had to bend the rod the ' float ' goes on to read the proper fuel levels, but it DID work.
An alternative! And a part number to boot! Where can I get one? Is that the only thing that has to be changed? Just bend the rod for the float?
those dual tanks never seem to completely work right anymore on any truck i hear aboug
Yeah, so ive heard. I'm hopin' to change that on mine.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Smith13
4.0L OHV & SOHC V6 Tech
4
12-29-2014 02:26 PM
iplayloudly
SOHC - 2.3L & 2.5L Lima Engines
8
11-03-2012 03:58 PM
hsteward90
General Technical & Electrical
4
11-16-2009 07:22 PM
rngprerunner
General Technical & Electrical
10
10-10-2005 03:31 PM
rangererv
General Technical & Electrical
7
04-01-2005 09:54 PM



Quick Reply: No gas gage, gas smell by the bed, pictures



All times are GMT -6. The time now is 02:39 AM.