guage
#1
guage
so i bought some new gauges from ebay or what ever and i took my hole inside apart to put them in and they dont fit... i thought this was for all rangers but must be different from xlt's...so upset y cant it work out... any idea or other guages that look like this? with the green/blue glow?
yeah them guages
yeah them guages
#3
#5
I guess you're SURE there's no way it could fit? If you used it, you'd want to peel the overlay off the auto tranny block in your existing dash probably. Don't know. Here's the standard Ranger overlays from the front side -- not a good picture, but I can't find a better one at the moment.
#7
Originally Posted by n3elz
Actually, it does look like one -- only as a "1 piece" part instead of 3 pieces. This is a crappy picture, but the first one I could lay my hands on, but the normal overlays are 3 pieces. This is from my original Gen-Edge how-to on changing dash color using glass paint.
I couldnt find it.
#8
The turn signals are in the wrong place, the indicators for 4wd are on the wrong side, our gauge face is 3 separate pieces, just to name a few differences. Not to be an ***, but how did you mistake that gauge face for the one in your truck?
That looks like it could be an older Ranger gauge face, maybe. But the gauges are the same through all the Rangers and some Explorers, except for maybe the lack of a tach.
The how-to should be on his cardomain page, which he shamelessly plugs everywhere:) EDIT: Well the old how-to he had linked on his page is gone, the how-to was not carried over to the new site, hopefully its not lost.
That looks like it could be an older Ranger gauge face, maybe. But the gauges are the same through all the Rangers and some Explorers, except for maybe the lack of a tach.
The how-to should be on his cardomain page, which he shamelessly plugs everywhere:) EDIT: Well the old how-to he had linked on his page is gone, the how-to was not carried over to the new site, hopefully its not lost.
Last edited by Pinecone; 12-06-2004 at 01:16 AM.
#10
#11
It looks real similar to a Ranger dash but I have never seen one like that before, I suppose it was just unlucky. Did the site not say what it fit?
While on this topic does anyone know of a gauge overlay that is made for standards? I hate having the Automatic gear opening in the bottom of it. It looks so silly... or does anyone know of a way to put an overlay across it or anything? thanks...
While on this topic does anyone know of a gauge overlay that is made for standards? I hate having the Automatic gear opening in the bottom of it. It looks so silly... or does anyone know of a way to put an overlay across it or anything? thanks...
#13
Originally Posted by Diabolic
Where is this 'how-to'.
I couldnt find it.
I couldnt find it.
#14
#15
#18
Here are what my EDGEs look like...gimmie a few and Ill post the link, gotta do some searching for them
Blue
Green
EDIT: heres the link, these should work
http://www.procarparts.com/store-det...98RG%2D4303RG1
Blue
Green
EDIT: heres the link, these should work
http://www.procarparts.com/store-det...98RG%2D4303RG1
Last edited by Bailey; 12-06-2004 at 03:40 AM.
#20
Okay, the how-to on changing your gauge color dirt cheap is up on Cardomain:
http://www.cardomain.com/memberpage/296394/24
http://www.cardomain.com/memberpage/296394/24
#21
Originally Posted by n3elz
Okay, the how-to on changing your gauge color dirt cheap is up on Cardomain:
http://www.cardomain.com/memberpage/296394/24
http://www.cardomain.com/memberpage/296394/24
Thread
Thread Starter
Forum
Replies
Last Post
crooked02edge
Interior Semi-Tech
11
11-25-2005 11:02 AM