Thanks Fedex Guy
#1
#3
#5
#8
No i attemped to regear my 7.5 myself didnt end good, thats why i ended up swaping in a J/Y 8.8. McDirt off dezert rangers is doing the install.Alot of members on that site go to him for gear installs.
#9
Yea it is, I looked at that site when i had the 7.5.Didnt even think about them when i ordered gears for the 8.8.Everywhere else i looked for yukon's 4.56's they ran around $280 for just gears.
I did saved money on my tuner from Lmperformance should be here monday.
I did saved money on my tuner from Lmperformance should be here monday.
#10
Setting up a gearset is not for the shadetree mechanic or the DIY guys.
Hell, I'm a mechanic and I refuse to do them on anything but my own vehicles. That way if I **** up, nobody but myself is hassling me.
Personally I prefer Ford gearsets, I have heard too many horror stories about the cheap aftermarket makers' sets chunking themselves due to poorly heat-treated low-quality steel in the castings. I don't think Ford makes gearsets over 4.10 though, so C'est la vie!
Hell, I'm a mechanic and I refuse to do them on anything but my own vehicles. That way if I **** up, nobody but myself is hassling me.
Personally I prefer Ford gearsets, I have heard too many horror stories about the cheap aftermarket makers' sets chunking themselves due to poorly heat-treated low-quality steel in the castings. I don't think Ford makes gearsets over 4.10 though, so C'est la vie!
#11
Setting up a gearset is not for the shadetree mechanic or the DIY guys.
Hell, I'm a mechanic and I refuse to do them on anything but my own vehicles. That way if I **** up, nobody but myself is hassling me.
Personally I prefer Ford gearsets, I have heard too many horror stories about the cheap aftermarket makers' sets chunking themselves due to poorly heat-treated low-quality steel in the castings. I don't think Ford makes gearsets over 4.10 though, so C'est la vie!
Hell, I'm a mechanic and I refuse to do them on anything but my own vehicles. That way if I **** up, nobody but myself is hassling me.
Personally I prefer Ford gearsets, I have heard too many horror stories about the cheap aftermarket makers' sets chunking themselves due to poorly heat-treated low-quality steel in the castings. I don't think Ford makes gearsets over 4.10 though, so C'est la vie!
Ford makes some gears i house just need to look at the part number
M at the end of the part number=Motive
A at the end=Visteon
No letter=Ford(like mine)
They also have a new vendor with a N not sure who makes those
#13
If I re-geared I would either do Motive or Yukon personally. I like Yukon the best but if I found Motives for a good deal I would be ok with them.
Great deal, that's why I always check here before buy anything that I need to "shop around" for. You never know when you might miss some random sight that has a crazy good deal.
Great deal, that's why I always check here before buy anything that I need to "shop around" for. You never know when you might miss some random sight that has a crazy good deal.
Thread
Thread Starter
Forum
Replies
Last Post