4x4 switch HELP!!
#1
4x4 switch HELP!!
so i was out n about today and saw some guy launched his little corolla up onto a curb. i didnt ask how he did it, just offered to help. chained the car up to my front tow hooks, threw it into reverse and went back. didnt get it off the curb. so i threw it into 4 hi to get more traction as i was spinning my tires. didnt work. so i flipped the truck around and hooked him up to the rear. worked that way but now my 4hi and 4lo lights blink on and off and truck wont engage 4wd? any help?
#2
Search search search. We've covered this again and again the last couple months. There must be at least 6 topics linking help on the shift motor and electric shift system now. I for one am not typing anything on this anymore.
Google searches with the right keywords will get you those topics even. Learn to search, my friend -- you'll get the info faster. This is a common problem, often discussed.
Google searches with the right keywords will get you those topics even. Learn to search, my friend -- you'll get the info faster. This is a common problem, often discussed.
#3
#4
#5
I have done it many times and have had no problems.
#6
yeah i dont know some one told me that pulling in reverse is not good. i would assume its using the "bad" side of the pinion... or its what you said.. i have pulled people too with no problems but i figure i would see if some light could be shed on this to clear things up..
since the gear is angled i would assume it would work better in one direction then the other...
since the gear is angled i would assume it would work better in one direction then the other...
#7
yeah i dont know some one told me that pulling in reverse is not good. i would assume its using the "bad" side of the pinion... or its what you said.. i have pulled people too with no problems but i figure i would see if some light could be shed on this to clear things up..
Thread
Thread Starter
Forum
Replies
Last Post
MudSlanger
General Technical & Electrical
5
11-19-2009 12:23 PM
lifted97ranger
General Technical & Electrical
60
03-22-2008 06:11 PM
Fx4wannabe01
General Technical & Electrical
9
10-06-2007 10:11 PM
Swoop1156
General Technical & Electrical
16
12-19-2005 08:42 PM