bad day Body lift
#1
bad day Body lift FIATTT Content
As many of you may know by now i was installing a body lift with Pedro yesterday. The bed was great it was super lights. then we get the the rear cab mount and it spins but then applied heat till the stock lock tite boiled. The driver front core support was NOT spinning but some how Pedro man handled the breaker bar and snapped a grade 10.9 Bolt idk how but here is what got accomplished lol. so i fixed the mount for the time being until i have to totally taken out. In the spring ill do the Lift.
Last edited by 04RangerDave; 01-16-2012 at 02:36 PM.
#2
#4
it wasn't frozen and believe me, everything was heated up if you read. locktite literally BOILED you could hear it and dave set his bushing on fire lmao
Last edited by 99offroadrngr; 01-11-2012 at 10:26 AM.
#5
Wirelessly posted (iPhone 3GS)
They were more than heated. Glowing bright red and came out with ease with myself applying the heat. The core I guess we were doing it wrong and it broke
Originally Posted by 99offroadrngr
it wasn't frozen and believe me, everything was heated up if you read. locktite literally BOILED you could hear it and dave set his bushing on fire lmao
#9
Wirelessly posted
Never heard a bolt boil like that. Got me a lil nervous with how close the fuel lines are. Hahah
Originally Posted by 99offroadrngr
it wasn't frozen and believe me, everything was heated up if you read. locktite literally BOILED you could hear it and dave set his bushing on fire lmao
#14
#15
#17
Wirelessly posted (iPhone 3GS)
Hahaha Pedro said "we can take it off useless u wanna be like Trent and drive around and let the cab soak for a month"
Originally Posted by 98liftedranger
So did you put the bed back down? Or are you rolling like Trent with Bed up cab down? lol
Nice work Pedro!
Nice work Pedro!
#18
#19
Don't pay to have it done unless you love burning through money. A shop would quote you 8-10 hours of labor...good chunk of change.
The two front core support bolts were the hardest to get loose on mine too. Took a lot of PB Blaster, heat, and patience...but we finally got them out. One person used a big *** pair of channel locks to hold that metal washer, while another person wrenched on the bolt.
The two front core support bolts were the hardest to get loose on mine too. Took a lot of PB Blaster, heat, and patience...but we finally got them out. One person used a big *** pair of channel locks to hold that metal washer, while another person wrenched on the bolt.
#20
Wirelessly posted (iPhone 3GS)
My bushing wasn't spinning. Pedro snapped the friggen bolt lmao grade 10.9. But it's going in Monday and it's only costing me $350.
Originally Posted by wyldechild
Don't pay to have it done unless you love burning through money. A shop would quote you 8-10 hours of labor...good chunk of change.
The two front core support bolts were the hardest to get loose on mine too. Took a lot of PB Blaster, heat, and patience...but we finally got them out. One person used a big *** pair of channel locks to hold that metal washer, while another person wrenched on the bolt.
The two front core support bolts were the hardest to get loose on mine too. Took a lot of PB Blaster, heat, and patience...but we finally got them out. One person used a big *** pair of channel locks to hold that metal washer, while another person wrenched on the bolt.
#24
#25
Wirelessly posted (iPhone 3GS)
Exactly. Plus I'll have a rental for a day or two, so I can look foward to driving the fiat or smart car! I just wanna rent one to see if they are fun and what not.
Exactly. Plus I'll have a rental for a day or two, so I can look foward to driving the fiat or smart car! I just wanna rent one to see if they are fun and what not.