module directly to the left of radio 2002
#1
module directly to the left of radio 2002
what is the module directly to the left of the radio in a 2002 ranger? I replaced the cluster from a truck of the same year, and when i got it all back together i had an audible beep from the module. like i said it is just to the left of the factory radio. it has 2 plugs going into it, and if i unplug the front plug, the beep stops.
btw, this is an awesome forum. i have spent a lot of time searching, but this is a difficult thing to search for:(
btw, this is an awesome forum. i have spent a lot of time searching, but this is a difficult thing to search for:(
#2
#3
#5
Now I get to pull the cluster again
#8
#11
Well, since the airbag module is under the console (cup holders) and not ANYWHERE near the location he described, I must have assumed wrong, huh? Sorry for being an ignorant moron...you can return to your throne, now.
Much less, for someone who considers themself an ASE certified tech to tell a person to "just unplug your airbags, you don't need them" is pretty retarded.
Much less, for someone who considers themself an ASE certified tech to tell a person to "just unplug your airbags, you don't need them" is pretty retarded.
#13
Unregistered User
Posts: n/a
second, i never said he "dosent need" his air bags so screw off looser.
sorry mods for being so harsh but i feal i am justified here
#14
none of the nonsense you speak is justifiable. since you are "ASE" certified, i guess you know that it is against the law to disconnect the airbags or even recommend it... i really think you need to get your head out of your *** dude... ase means nothing in the real world... one day you will get a reality check... maybe you already have but you are just too arrogant to realize it...
#15
#17
It was the module to the left of the radio beeping, not the airbag module. When I unplugged it the beeping stopped, but so did my windshield wipers. Needless to say I need wipers down here in Florida so I plugged it back in.
I haven't pulled the cluster back out to replace the airbag light yet, but I will tomorrow.
I haven't pulled the cluster back out to replace the airbag light yet, but I will tomorrow.
#19
no, it started as soon as I swapped the cluster. the only variable was that I removed the airbag light from the new cluster because it stays on constantly, and on the old cluster the check engine light was burned out and it works on the new one.
#21
When you get the Restraints indicator bulb fixed, post the flash code pattern and we should be able to provide some info on what needs to be done to repair the Restraints System.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: 2001-2002 4x4 module
SPYDER0382
OLD - Interior, Exterior, Electrical, & Misc.
3
12-08-2010 07:02 AM
lsf53
General Technical & Electrical
2
06-02-2010 04:30 PM
rngprerunner
General Technical & Electrical
19
06-04-2009 08:56 PM