Help with 02 3.0 serp belt
#1
Help with 02 3.0 serp belt
Hi All, Im currently fighting with my serp belt to make it stay on its pulleys and in my engine bay. Ive got a new idler pulley and a new tensioner but 1-ribs worth of belt likes to hang off of the idler pulley and this causes the belt to sometimes hang off of the AC pulley. Is it possible that I got the wrong pulley from the parts store or am I being dumb for a different reason?
#4
I threw that out a while ago, when I replaced that the truck was actually owned by my neighbor. I did read in a reddit post that the bearings can sometimes be pressed in from the factory too deep, so I used a bearing tool tonight to set the bearing back about 1/16", but the belt appears to still rest in the same place.
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post
riverguy99@gmail.com
4.0L OHV & SOHC V6 Tech
3
07-12-2022 04:49 AM
NewShockerGuy
DOHC - 2.3L Duratec / Mazda L Engines
1
09-20-2013 07:59 AM