Holy No Brakes batman!
#1
Holy No Brakes batman!
So i replaced my front brakes...Rotors and pads..The abs light came on before i replaced the pads..then went off after i changed them.
Now they are back on.After i replaced the brakes My brake system isnt really working that Great.I would Hit the brake hard and it slows the car down but the pedel is stiff at first pump.The pedel Gets softer after i pump it and then its fine.I dont feel the rear brakes engage but they do work if the E brake is on.
Can anyone think of something???...I will see if bleeding them will help.
Should i bleed all four?
Now they are back on.After i replaced the brakes My brake system isnt really working that Great.I would Hit the brake hard and it slows the car down but the pedel is stiff at first pump.The pedel Gets softer after i pump it and then its fine.I dont feel the rear brakes engage but they do work if the E brake is on.
Can anyone think of something???...I will see if bleeding them will help.
Should i bleed all four?
#2
#5
The logical problem is simply air. If it worked fine before you touched it, and now it doesn't work fine, then you probably induced air. Bleed it and you'll be fine.
The alternatives are a busted brake line somewhere and you're spewing fluid when you step on the pedal, or your master is bad, or the vacuum booster is popped off.
The alternatives are a busted brake line somewhere and you're spewing fluid when you step on the pedal, or your master is bad, or the vacuum booster is popped off.
Thread
Thread Starter
Forum
Replies
Last Post
eBay / Craigslist Find: holy giant ranger batman!!!
darangerdanger
eBay & Craigslist Finds
14
11-06-2010 09:48 AM
Hefavitzen
General Technical & Electrical
7
06-15-2006 07:13 PM