Expo dome light help
#1
Expo dome light help
Attempted to install expo dome light last week. I simply took out the 3 screws and removed the stock light. I then went to install the expo dome light, but noticed a problem.
Two of the screw holes line up (the electrical hookup and another hole) but the third one does not. Instead, there is a strange square like shape cut from factory where the third screw hole should be.
The regular dome light works, but the map lights wont. Should there be a third screw hole there?
Two of the screw holes line up (the electrical hookup and another hole) but the third one does not. Instead, there is a strange square like shape cut from factory where the third screw hole should be.
The regular dome light works, but the map lights wont. Should there be a third screw hole there?
Thread
Thread Starter
Forum
Replies
Last Post
billabong98z
OLD - Interior, Exterior, Electrical, & Misc.
11
10-08-2010 09:36 AM
eBay / Craigslist Find: 02 Expo Mirror w/ light and Expo 8.8 w/spool
Masteratarms93
eBay & Craigslist Finds
3
09-15-2010 11:41 AM
MugenCRX04
OLD - Interior, Exterior, Electrical, & Misc.
10
08-03-2009 07:11 PM