kc daylighter switched to HID
#4
Join Date: Dec 2009
Location: kalamazoo, Michigan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
#6
Join Date: Dec 2009
Location: kalamazoo, Michigan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Apexcone Raptor HID Kit (35w or 55w): HID Kits, DEPO Lights, BMW Bumpers & Lighting - DDM Tuning
now i need the h3 bulbs? and is this really worth it, are they going to be as bright or brighter and longer range than my stock bulbs? ive got the 130w long range lights...
and it says this for the 55w bulbs "Our 55w HID Kit is not recommended for smaller fog light housings because they tend to concentrate a large amount of heat in a small area." can i use these in my 6" diameter housings?
sorry for all the questions
thanks
-Luc
#7
ok so i got to this...
Apexcone Raptor HID Kit (35w or 55w): HID Kits, DEPO Lights, BMW Bumpers & Lighting - DDM Tuning
now i need the h3 bulbs? and is this really worth it, are they going to be as bright or brighter and longer range than my stock bulbs? ive got the 130w long range lights...
and it says this for the 55w bulbs "Our 55w HID Kit is not recommended for smaller fog light housings because they tend to concentrate a large amount of heat in a small area." can i use these in my 6" diameter housings?
sorry for all the questions
thanks
-Luc
Apexcone Raptor HID Kit (35w or 55w): HID Kits, DEPO Lights, BMW Bumpers & Lighting - DDM Tuning
now i need the h3 bulbs? and is this really worth it, are they going to be as bright or brighter and longer range than my stock bulbs? ive got the 130w long range lights...
and it says this for the 55w bulbs "Our 55w HID Kit is not recommended for smaller fog light housings because they tend to concentrate a large amount of heat in a small area." can i use these in my 6" diameter housings?
sorry for all the questions
thanks
-Luc
#8
Join Date: Dec 2009
Location: kalamazoo, Michigan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
ya but that mirror finish can peel and maybe melt but idk. i just wanna find out if there going to be as bright or brighter. b/c they are already bright as hell, would just rather have hid's in em lol
#9
Member
iTrader: (1)
Join Date: Feb 2005
Location: SoCal
Posts: 4,428
Likes: 0
Received 0 Likes
on
0 Posts
I switched to HID in my Pro Comp Off road lights
pics:
https://www.ranger-forums.com/f69/hi...finally-67735/
https://www.ranger-forums.com/f18/hi...estions-62172/
pics:
https://www.ranger-forums.com/f69/hi...finally-67735/
https://www.ranger-forums.com/f18/hi...estions-62172/
#10
Join Date: Dec 2009
Location: kalamazoo, Michigan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
I switched to HID in my Pro Comp Off road lights
pics:
https://www.ranger-forums.com/f69/hi...finally-67735/
https://www.ranger-forums.com/f18/hi...estions-62172/
pics:
https://www.ranger-forums.com/f69/hi...finally-67735/
https://www.ranger-forums.com/f18/hi...estions-62172/
also, is the above listed bulbs good?
Last edited by rangerluc; 03-24-2010 at 07:32 PM.
#12
Join Date: Dec 2009
Location: kalamazoo, Michigan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Apexcone Raptor HID Kit (35w or 55w): HID Kits, DEPO Lights, BMW Bumpers & Lighting - DDM Tuning
im thinkin 55w?
#13
If the Daylighter you're using is 150w, you're SOL. The 150w are sealed bulbs. You need a 130w or 100w Daylighter to begin with because they use H3 bulbs. All you need is a single beam HID kit for H3 bulbs and maybe drill out a bigger wire pass-through hole on the back of the lamp housing and you're done.
This CANNOT be done to KC slimlites(aka the anorexic sister of the obese daylighter). The housings are just not fat enough for the length of the HID bulbs.
This CANNOT be done to KC slimlites(aka the anorexic sister of the obese daylighter). The housings are just not fat enough for the length of the HID bulbs.
#14
Join Date: Dec 2009
Location: kalamazoo, Michigan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
If the Daylighter you're using is 150w, you're SOL. The 150w are sealed bulbs. You need a 130w or 100w Daylighter to begin with because they use H3 bulbs. All you need is a single beam HID kit for H3 bulbs and maybe drill out a bigger wire pass-through hole on the back of the lamp housing and you're done.
This CANNOT be done to KC slimlites(aka the anorexic sister of the obese daylighter). The housings are just not fat enough for the length of the HID bulbs.
This CANNOT be done to KC slimlites(aka the anorexic sister of the obese daylighter). The housings are just not fat enough for the length of the HID bulbs.
Thread
Thread Starter
Forum
Replies
Last Post
FMD
Ranger Products, Company, & Member Reviews
8
07-03-2006 09:00 AM