i need help!!!!!!!! - Ranger-Forums - The Ultimate Ford Ranger Resource
Ford Ranger Forum - Forums for Ford Ranger enthusiast!

Go Back   Ranger-Forums - The Ultimate Ford Ranger Resource Arrow Ranger-Forums Technical Forum Arrow General Technical & Electrical

General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

LinkBack Thread Tools Search this Thread
Old 09-27-2008
lifted_Mazda01's Avatar
Thread Starter

I am: Josh Small
Join Date: Aug 2008
Location: Davie, FLA
Vehicle: 2001 Mazda B3000 DS
Posts: 685
Total Props: 0
i need help!!!!!!!!

ok leaving my grls house this evening i shifted my truck into reverse, i was like wow i got a little play in my SHIFTER, so i go to put it in drive and i had to rock it into that gear i was like WTF, so i shift down to 1st, again i had to rock it back and forth to get it there. goin down the road i put it back in drive, TRANNY SHIFTS FINE... even the fluid is brand new... so i go to the gas station to get some chew and put it in park, thing is it said it was in park, then it slid in between P and R so i stepped out of the truck and acted like it was in N. i push it forward against the hill back to my parking spot (might i add it was still between P and R, so i figured its not getting into park, so i had to put it in N to start it, and drove to the rodeo grounds where i took the colum apart, nothing seemed out of the ordinary for what i could see and sprayed some brake clean into it hopeing to free it up or something. no difference, so i try many gears, got into all of them rocking the shifter back and forth except P and 1st, so i put it in park (between p and r) and get out, push the truck forward 10ft and then back wards, so i check the linkage to the tranny, the little shift thingy on it, and put it into park again afyer gion through the gears, and it was still between p and r so i get under the truck and push the shifter the rest of the way, and when i got into the truck i noticed a brass colored torx bolt on the floorboard, and it didnt hit me til i opend the colum that maybe this bolt fell out, but from where??? can i do this myself knowing its something to do with the shifter, joint, cable area??? dash be removed???? someone help me out amd i hope this was descriptive enough

Florida Cracker
2001 Mazda B3000 Dual Sport
8.8 rear end 4.10s open
Reply With Quote
+ 0 -

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help figuring out what shocks I need Slow94 Suspension Tech 0 06-20-2010 04:51 PM
I need new shocks and i need some help 2007BlackFX4 Suspension Tech 3 06-03-2010 07:36 PM
so i need a sub but i need help finding one... DeMar17 Audio & Video Tech 8 06-10-2009 06:45 AM
NEED HELP!!! need to install new Cd player 01edgeMan Audio & Video Tech 6 01-11-2009 06:28 PM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 01:22 PM.