minimal lift to run a 33x12.50
#1
minimal lift to run a 33x12.50
What is the least amount of lift you need to run a 33x12.50? I understand that most people will say a 3" bodylift because my truck is 4x4 but I don't want to go with that much of a bodylift. My thinking is maybe crank the t-bars about a inch and a half, lift shackle in the rear and a 1" bodylift. I am not afraid to do some minor trimming to the fenders. My reasoning for this is that I am getting a campershell very soon and do not like the idea of that much bodylift with one.
Chad
Chad
#2
#3
#4
#10
#12
so then dont run superswampers theres a thought and YES 33x12.5 will fit stock. on stock 15x7 you need to like crank the t-bars almost max and on 15x8 with no more then a 3.75" BS you need to crank the t-bars and trim the front valance on the inside and a little on the inside of the bottom of the front flare.... btw here is bills truck with cranked t-bars and stock rims with 33x12.5x15, no triming
now here is kyles old truck with 33x12.5x15 stock on 15x8's with trimming and crank
now here is jareds 33x12.5x15 stock on 15x8 with trimming and crank
now here is kyles old truck with 33x12.5x15 stock on 15x8's with trimming and crank
now here is jareds 33x12.5x15 stock on 15x8 with trimming and crank
#13
#15