General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

98 3.0 starting issues

Thread Tools
 
Search this Thread
 
  #1  
Old 02-03-2015
tonys338's Avatar
Member
Thread Starter
Join Date: Jul 2014
Location: Dacula, Ga
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
98 3.0 starting issues

Hello,
I have a 98 Ranger 6cyl 3.0 and just recently I have had issues starting my truck. I'm a DIY tech and just recently replaced the head gaskets and it runs like a top but about a week ago I would turn the key and hear a click and after a few turns of the key it would eventually start. I thought battery or alternator and checked both and starter and the battery read low so I replaced the battery which was under warranty and both the starter and alternator tested good. Today was the worst day trying to start so I opted to change the solenoid with no change. turn key and a click. I will say that when it does start it isn't sluggish and starts right up. any help would be greatly appreciated. I searched your forum for this same issue and found nothing.
Thanks so much.
Tony
Firefighter GA
 
  #2  
Old 02-03-2015
RLong31's Avatar
The Ban Hammer
iTrader: (5)
Join Date: Jul 2009
Location: Monrovia, IN
Posts: 2,594
Likes: 0
Received 2 Likes on 2 Posts
You didn't replace the starter? It just clicking sounds like the starter going bad.
 
  #3  
Old 02-03-2015
tonys338's Avatar
Member
Thread Starter
Join Date: Jul 2014
Location: Dacula, Ga
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Yeah, a starter was $100 and the solenoid was $20 so it sounds like I gambled and lost. Thanks
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
racsan
4.0L OHV & SOHC V6 Tech
1
01-11-2011 07:55 PM
smokindmax
SOHC - 2.3L & 2.5L Lima Engines
5
09-01-2009 10:33 AM
learjettech
2.9L & 3.0L V6 Tech
3
04-21-2009 06:42 PM
sawred
General Technical & Electrical
21
08-04-2006 08:48 AM



Quick Reply: 98 3.0 starting issues



All times are GMT -6. The time now is 07:49 PM.