No Lo Beams - Ranger-Forums - The Ultimate Ford Ranger Resource
Ford Ranger Forum - Forums for Ford Ranger enthusiast!

Go Back   Ranger-Forums - The Ultimate Ford Ranger Resource Arrow Ranger-Forums Technical Forum Arrow General Technical & Electrical

General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

LinkBack Thread Tools Search this Thread
Old 09-30-2014
Thread Starter

I am: Fabrice Clark
Join Date: Nov 2013
Location: Highlands Ranch, co
Vehicle: 2002 Ford Ranger xlt
Drive Type: 4x4
Engine: 4.0
Posts: 1
Total Props: 0
No Lo Beams

I do not have any Low Beams but I do have High Beams. Checked fuses and they are all good. Had heavy rain the night before but no issues during the drive then. Any thoughts?
Reply With Quote
+ 0 -
Old 10-01-2014
iTrader: (2)
I am: Kevin
Join Date: May 2014
Location: Lake Mary, Florida
Vehicle: 2000 Ford Ranger
Drive Type: 4x4
Engine: 3.0
Posts: 348
Total Props: 0
It would seem unlikely, but perhaps both your bulbs low beam filiments are burned out. You may have been driving around with one burned out and did not know it; now that both are out, you notice no light with the low beams.

Replace one and see if the low beam comes back on that side, then replace the other.

Or, if you have a lest light or meter, put the low beams on, remove the bulb, and see if you have voltage to the low beam bulb socket.
Reply With Quote
+ 0 -
Old 10-01-2014
I am: Tim Walsh
Join Date: Jun 2005
Location: Havertown,PA
Vehicle: 2010 Ford Sport
Drive Type: 4x2
Engine: 4.0
Posts: 431
Total Props: 0
I had this this year on my kids Escort. It was both bulbs! I thought no way both burned out same time, but they did. Weird.
Reply With Quote
+ 0 -

Similar Threads
Thread Thread Starter Forum Replies Last Post
high beams and low beams pgiordano General Technical & Electrical 4 09-11-2009 05:56 AM
relay to keep both high beams and low on at the same time? flomaster General Technical & Electrical 6 12-21-2006 05:12 PM
I Beams And Dropped Spindles Danny52186 Suspension Tech 7 11-25-2006 10:29 PM
i-beams or A-arms? civic87crx Suspension Tech 17 10-13-2006 03:15 PM
Twin I-beams twofinhogie Suspension Tech 13 09-08-2005 08:25 AM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 08:23 AM.