just got my headlight & foglight kit from ddm, is there a way to hook them up without cutting the ford factory plugs off for my fogs, i have been searching the forum for an hour now & all i see is to cut them off

 

& for those of you that run a hid setup did i need to buy the relay kit for them, i did not get the relay kits for my heads & fogs ddm said i didnt need them?

 

Why did you buy the H10? My fogs have a ballast just like my headlights. Not sure what you mean by the relay kit? You shouldn't need to cut your fog harness off. I didn't.

 

^ H10 = 9145 = OEM bulb size

Everyone who says to cut the connector off is retarded. You can simply plug the OEM plug that plugs into the foglight bulb directly into the ballast itself. No cutting of anything is needed, just make sure you have the correct polarity when plugging it in.

Actually the only thing you need to cut is the little adapter harness off of the HID kit and throw it away.

 

nice, thanks korey

 

well i got um all hooked up & no cutting of wires thanks 2 korey, now my other question is there a projector kit to adapt a 9007 bulb into a projector? if so can some1 get me a direct link to them, this will be my next step for my truck is retro fit projectors into my stock heads like sum i seen on here but just with a 9007 bulb

 

Btm757 just did a projector retrofit, his thread listed where he got his parts.