General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Windows

Thread Tools
 
Search this Thread
 
  #1  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
Windows

well today after school my windows roll down and up and now i get home and want to roll them down they they dont work. any ideas?
 
  #2  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
power windows btw
 
  #3  
Old 12-12-2007
M50B06's Avatar
Member
Join Date: May 2007
Location: Ravenna ohio
Posts: 315
Likes: 0
Received 0 Likes on 0 Posts
Does driver window work from driver side-does pass. window work from driver side-does pass window work from pass side-check all buttons to see if you can narrow to one button or all three buttons
i would check fuse 1st to make sure its not bad
then take off the door panel and check to see if wire harness came loose from button
 
  #4  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
dosnt work from driver side or passanger side, also my dome light dosnt work anymore and 4x4 lights are flashing. and also the unlock button dosnt work on the drivers side door, it will lock but not unlock but the passanger side unlock/lock button works perfect.
 
  #5  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
alright it blew a fuse but every time i put a new one it keeps blowing the fuse.
 
  #6  
Old 12-12-2007
malydeen's Avatar
Member
iTrader: (12)
Join Date: Jul 2007
Location: Minneapolis, MN
Posts: 632
Likes: 0
Received 4 Likes on 4 Posts
You have a short some where in your system. I would start with the door locks and look for the short there. You could also try unhooking the battery changing the fuse then hooking the battery back up.
 
  #7  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
unhooked the battery and all that still no luck, unhooked the unlock button on the drivers side and also the window buttons on driver side and still no luck. im clueless.
 
  #8  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
figured it out.
 
  #9  
Old 12-12-2007
5speedin2.3's Avatar
Member
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by TrailRanger52
figured it out.
so what was wrong with it?
 
  #10  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
i have an explorer ohc and i have the wires tapd for the ohc domelight into the stock domlight like n3elz tutorial says and it worked good untill today it didnt like it i guess lol.
 
  #11  
Old 12-12-2007
5speedin2.3's Avatar
Member
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by TrailRanger52
i have an explorer ohc and i have the wires tapd for the ohc domelight into the stock domlight like n3elz tutorial says and it worked good untill today it didnt like it i guess lol.
ah i see..
ive installed a few OHC's and ive never had any problems.

electrical tape, scotch loks and butt connectors are your friend haha.
that is, until one of the scotch loks fail and everything ****s up.
 
  #12  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
yea i always use butt connectors. but on those wires i just had them electircal taped together, that may have been my problem.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Quinnin
Interior Semi-Tech
35
02-20-2020 10:56 AM
Strider0O0
Interior, Exterior, & Electrical
23
08-10-2014 06:42 PM
Igobytwitch
General Technical & Electrical
8
11-12-2008 06:41 PM
smokinedge
General Technical & Electrical
1
05-28-2008 06:02 PM
Diabolic
Auto Detailing 101
16
04-29-2005 10:49 AM



Quick Reply: Windows



All times are GMT -6. The time now is 07:00 AM.