child safety windows
#1
#2
get to the inside of the door to see how far up your motor assembly and all that is mounted. you may be able to move it down if its up high. im pretty sure theres no sensor or anything that tells it to stop.
you could also swap out assemblies from a ranger or explorer that doesnt stop that way. keep the stock glass though.
you could also swap out assemblies from a ranger or explorer that doesnt stop that way. keep the stock glass though.
#4
find another truck with manual windows or you could gut the entire assembly from a truck with power windows and convert.
you may also be able to take off the doors of the donor truck and mount them to yours. if the truck has power windows, just make sure you cut the wires long enough to do somethin with.
you may also be able to take off the doors of the donor truck and mount them to yours. if the truck has power windows, just make sure you cut the wires long enough to do somethin with.
Last edited by loneFX4; 05-12-2005 at 08:35 AM. Reason: thought of somethin different
#5
Thread
Thread Starter
Forum
Replies
Last Post
smokinedge
General Technical & Electrical
1
05-28-2008 06:02 PM