General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

sparks and fire after shutting off

  #1  
Old 11-04-2012
littlered's Avatar
Member
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Lewistown, Mo
Posts: 1,542
Likes: 0
Received 1 Like on 1 Post
sparks and fire after shutting off

Well tonight i had an exciting experience. I move the truck to infront of the shed so i could load a few things up and when i shut it off there was a noise coming from under the truck. It was like a spinning noise. Well i got out and it kept going so i tryed to start the truck back up and it wouldnt start. I got out and got to looking and there were sparks and an orange glow coming from the starter. I grab a pair of pliers and popped the hood and undid the battery. which stopped the spinning noise and the sparks. i waited a few minutes and hooked the battery back up and the truck started up and ran just fine. I drove it around the yard moving some stuff and didnt have any more problems. I was just wondering what could have caused this and is there anything that i need to check on or replace?
 
  #2  
Old 11-04-2012
Join Date: Feb 2011
Location: .
Posts: 1,018
Likes: 0
Received 2 Likes on 2 Posts
Sounds like a short circuit. Wires touched, solenoid broke down and had constant feed of power. Rare but happens
 
  #3  
Old 11-05-2012
littlered's Avatar
Member
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Lewistown, Mo
Posts: 1,542
Likes: 0
Received 1 Like on 1 Post
thanks, but should i replace anything so that it doesnt happen again or check to make sure it didnt damage anything?
 
  #4  
Old 11-05-2012
The Twanksta's Avatar
Member
Join Date: Dec 2008
Location: FL
Posts: 16
Likes: 0
Received 1 Like on 1 Post
I would probably replace the starter, last thing you want is for it to happen again when your not there and its sitting next to your house or worse, inside you garage and catch fire..
 
  #5  
Old 11-05-2012
Join Date: Feb 2011
Location: .
Posts: 1,018
Likes: 0
Received 2 Likes on 2 Posts
starter AND solenoid. usually they come as one unit but they can be separated. So just do both and be safe

ALSO: when you have the starter off look, look into the bellhousing of the tranny and look to see if the fly wheel teeth are in good shape. Starter teeth are designed to break away before fly wheel teeth do but just to be sure id visually inspect
 
  #6  
Old 11-05-2012
Ardy's Avatar
Member
Join Date: Aug 2010
Location: Windsor NS
Posts: 276
Likes: 0
Received 0 Likes on 0 Posts
Sounds like the starter was stuck on the on position/solenoid.

Might be worth replacing both.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Miller5880
2.9L & 3.0L V6 Tech
2
07-13-2014 09:01 AM
littlered
General Ford Ranger Discussion
1
08-29-2013 10:06 AM
paganwars
General Ford Ranger Discussion
8
07-07-2011 07:06 PM
BettyVo7Ranger
General Ford Ranger Discussion
14
02-18-2010 10:18 PM
jtfoxman
4.0L OHV & SOHC V6 Tech
2
12-13-2007 07:54 AM


Thread Tools
Search this Thread
Quick Reply: sparks and fire after shutting off



All times are GMT -6. The time now is 10:00 AM.