what should i do with this air tank?
#1
what should i do with this air tank?
i got this from work a few months ago it was on a derik trailer, i had to chop up because it was deemed unsafe after one like it in texas choped someone in half anyway i pull the air tank of and brought it home and im woundering what i should do with it? im thinking onboard air? im woundering where i should mount it ill clean it up tommorow and paint it black
#4
How much psi is it rated for?
If its got a hydro stamp on it, that should have the psi rating as well as the last date checked.
If that tank is known to have issues blowing up, I would drill holes in it and sell it for scrap. Unless you're going to be using it for >300psi, and it was rated for 3000. Then you would probably be ok. But man, you would not want that pig to blow up in your box! There's a lot of shrapnel in something like that.
If its got a hydro stamp on it, that should have the psi rating as well as the last date checked.
If that tank is known to have issues blowing up, I would drill holes in it and sell it for scrap. Unless you're going to be using it for >300psi, and it was rated for 3000. Then you would probably be ok. But man, you would not want that pig to blow up in your box! There's a lot of shrapnel in something like that.
#5
Member
iTrader: (3)
Join Date: Aug 2006
Location: btwn the Buff and the Roc
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
How much psi is it rated for?
If its got a hydro stamp on it, that should have the psi rating as well as the last date checked.
If that tank is known to have issues blowing up, I would drill holes in it and sell it for scrap. Unless you're going to be using it for >300psi, and it was rated for 3000. Then you would probably be ok. But man, you would not want that pig to blow up in your box! There's a lot of shrapnel in something like that.
If its got a hydro stamp on it, that should have the psi rating as well as the last date checked.
If that tank is known to have issues blowing up, I would drill holes in it and sell it for scrap. Unless you're going to be using it for >300psi, and it was rated for 3000. Then you would probably be ok. But man, you would not want that pig to blow up in your box! There's a lot of shrapnel in something like that.
#12
why does everyone think its going to blow up? im not going to run 300 psi in it, it looks like crap in the pics but as far as the tank goes theres no rust on the outside what you are seeing is red paint over black paint covered in dust im going to pull everything off and have my cousin run his camra inside of it to see how bad it is internaly
he has one of these BK5500, Scope, Video Inspection
he has one of these BK5500, Scope, Video Inspection
#14
#15
#16
Yeah I just reread the OP. I thought you meant you had to chop up the tank because it was deemed unsafe. I didn't realize you meant the trailer itself sorry.
Fill er up! If its a steel tank and not beat up (knicks in the actual metal are bad) then I can't see how its worse than any air pig. Or propane tank for that matter. I thought you were going to fill a tank that was bad with air.
Fill er up! If its a steel tank and not beat up (knicks in the actual metal are bad) then I can't see how its worse than any air pig. Or propane tank for that matter. I thought you were going to fill a tank that was bad with air.
#17
correct the trailer had a folding derik on it the derik got stuck a guy climbed it and disconected a hydro hose and it folded up and cut him inhalf the trailer i got the tank off of was not the same one but was its twin i think the tank is too small to make a good grill besides ill take gas over charcoal any day
#20
#22
#24
yall can all go make your grills i think they would look awsome but im not lighting something on fire thats conected to my truck and if the hot coals fall out it will screw up paint and melt plastic im good i gotta little colman propane grill i take camping and a charbroil 2 burner propane grill i use at home
plus i dont have a hitch i may make a mailbox out of it that would be cool
plus i dont have a hitch i may make a mailbox out of it that would be cool
Thread
Thread Starter
Forum
Replies
Last Post
njdriver04
DOHC - 2.3L Duratec / Mazda L Engines
3
07-30-2019 10:37 AM
malydeen
OLD - Interior, Exterior, Electrical, & Misc.
1
01-31-2010 05:58 PM