power mirrors
#1
#2
RF Veteran
iTrader: (1)
Shouldn't be too hard, you need the switch of course
Looks like one 12volt wire to Switch, with 5amp fuse
One Ground wire to Switch
Then 3 wires to each power mirror from the switch.
2008 and 2006 wiring diagrams, they used different colors
NCA on wiring diagrams means No Color Assigned, but there should be pin numbers
i.e. on switch Pin1 is Ground, pin2 goes to pin3 on right mirror, pin3 is 12volts, ect..............
The wires might already be there, but might not be as well, lol
Looks like one 12volt wire to Switch, with 5amp fuse
One Ground wire to Switch
Then 3 wires to each power mirror from the switch.
2008 and 2006 wiring diagrams, they used different colors
NCA on wiring diagrams means No Color Assigned, but there should be pin numbers
i.e. on switch Pin1 is Ground, pin2 goes to pin3 on right mirror, pin3 is 12volts, ect..............
The wires might already be there, but might not be as well, lol
Last edited by RonD; 04-01-2017 at 07:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: Newer Mirrors, Pwrd ’06 + Mirrors - MA
Scrambler82
OLD - Interior, Exterior, Electrical, & Misc.
53
07-24-2012 07:36 AM
Rentz
OLD - Interior, Exterior, Electrical, & Misc.
2
04-25-2011 09:06 AM
FMD
General Ford Ranger Discussion
16
03-31-2011 12:02 PM
yellow_tremor_03
Exterior Semi-Tech
2
02-01-2011 08:42 AM
Jonesy2081
Interior Semi-Tech
17
04-26-2005 07:15 PM