How-To: Airbag Light (Code 2-7) - Ranger-Forums - The Ultimate Ford Ranger Resource
Ford Ranger Forum - Forums for Ford Ranger enthusiast!

Go Back   Ranger-Forums - The Ultimate Ford Ranger Resource Arrow Ranger-Forums Technical Forum Arrow How-To & DIY Articles Arrow Interior, Exterior, & Electrical

Interior, Exterior, & Electrical How-To & DIY articles pertaining to the 'Interior, Exterior, & Electrical' in this sub-forum.

LinkBack Thread Tools Search this Thread
Old 08-26-2006
RockysFord's Avatar
Thread Starter

I am: Rocky Bowen
Join Date: May 2005
Location: Columbus Ohio
Vehicle: 2003 Ford Ranger
Posts: 2,782
Total Props: 0
How-To: Airbag Light (Code 2-7)

Ok finally got around to fixing this thing.... SOME PICTURES ARE GOOD, SOME TOTALLY SUCK!
Make a trip to your local radio shack and get a 272-334 12v DC bulb....i just showed him that and he knew just what it was....They only come in GREEN which is what i got, and RED....under 3$ for 2 of them

Tools needed.... 8mm socket for the battery cable, Philips screw driver, a small flat head, soldering iron, solder, and side cuts (i think thas all)

Pop the hood and unhook the negative battery cable

You dont have to but i did, remove the cup holder / center console...The surrounding trim piece just pops off....also remove the ashtray to see whats going on.....

Remove 2 screws on the bottom of the unit...and it swings out towards the back of the truck, with some help it will flip down and come out..
Unplug the wires from the back, and pull it out

Go to your work station (back of my quad)

And pop the top off....and you will see this...

You can pull the whole piece out, i didnt realize until i cut the old light out...
light gone..

As i grabbed the soldering iron (my old one only the END got hot...well this one the whole Fin rod gets hot....burnt the P!SS out of my hand

Solder the new light on

Tuck it back down in the hole...

Pop the top back on and assemble it all back together, and your finished product is a green light...

And no airbag light...

Works well, although my hand hurts im very happy it worked and i got it done....


2006 Jeep SRT-8 Grand Cherokee
K&N Intake, Magnaflow Exhaust, Eibach Lowering Kit, Custom Tunes, FRI Lilboy Cam 114 LSA
Reply With Quote
+ 0 -
Old 05-13-2007
rwenzing's Avatar
RF Veteran
iTrader: (4)
I am: Bob .
Join Date: Nov 2004
Location: Michigan
Vehicle: 2003 Ford Ranger
Drive Type: 4x4
Engine: 5.0
Posts: 7,773
Total Props: 19
272-334 is available online directly from If you can't get it that way, just find a bulb with equivalent specs: 12VDC, 65mA
Reply With Quote
+ 0 -

Similar Threads
Thread Thread Starter Forum Replies Last Post
airbag light blinks a code 92yjpa 2.9L & 3.0L V6 Tech 11 12-11-2009 10:14 AM
airbag code 4-7 any body know what it is. also door open light on miran587 General Technical & Electrical 5 08-10-2009 02:50 PM
Airbag Light is blinking code 32 jj1234 General Technical & Electrical 0 06-10-2009 07:32 PM
Airbag Code 72 jdbs3 General Technical & Electrical 1 11-16-2007 10:37 AM
Airbag Code 3-2 morse General Technical & Electrical 5 01-03-2007 10:14 PM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 08:26 PM.