Interior, Exterior, Electrical, & Misc.Ford Ranger interior, exterior, and electrical parts, i.e. overhead consoles, speakers, lights, bumpers, doors, wiring. This sub-forum is also for ads which list multiple Ford Ranger items per thread.
Welcome to the Ford Ranger Forums - The Ultimate Ford Ranger Resource.
Kinda funny but then again not.
I recently bought a 1999 Ranger 4X4 and for the first time tried to push in the lighter to see if it worked. It wouldnt move so I tried to pull the lighter out. Nope. I then yanked on it and BOY did it come out!
The lighter appears to have been glued in so when I yanked the bezel broke and the entire unit came through the now large hole.
I am now seeking a replacement that has:
4wd + Foglights + Cig lighter + 12v.
Two foglight switches is also fine provided it come with the additional switch
Ty Buddy. I fixed it due to absolute necessity.
I took two of those 2 dollar add-on 12V plugs from a local auto parts place then very carefully cut the outside ring off with a Dremel. That left just enough to slide what was left back in from the back of the bexel. I Then used Gorrilla Glue and let it sit for about 20 hours. For giggles I did the same to the 12V plug. Hense 2.
So far it is rock solid and I change devices constantly. I also broke down and hardwired a 12V multi port with USB. Not a single issue since But TY for asking