If you haven’t purchased your seats yet try this.
JY run… find an 04 passenger seat the same as yours.
Take your Driver’s Side 60% Seat apart and remove the Seat Slider Track.
Put the Driver’s side track on the passenger seat Seat Pan.
Yes they are the same thing, there are holes on both side so the seats can be interchanged.
You will not have the Lumbar Support System but that can be swapped later on.
Before you buy the other passenger seat, take a look under the existing drivers 60/40 seat and see if the track bolts on as my 03 did; if so then everything will swap.
4x4, 5sp, Std Cab, Stepside, E4 Red
4” Lift - Coil-Overs, 6” SkyJacker Leafs - No Blocks (Mistake)
31 Spline FX4 Rear Axle, 4.56s and OX Locker, Hurst Shifter w/Optional Stick and "Made by Grev" alignment adapter