Stock shifter removal help
#1
Stock shifter removal help
I've exhausted all known possibilites to try to get the answer to this, but I'm having trouble removing the stock shifter. I have removed the bolt from the passengers side and tried to tighten it as much as i can on the drivers side but it just keeps getting tighter and tighter and it feels like its gonna break. All the how-to's that i've seen do not help. removing the torx screws is not something i wanna do. what do i have to do to get this thing off??
Thanks
Thanks
#2
Member
iTrader: (11)
Join Date: Jan 2005
Location: West Topsham, VT
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
Manual trans, right?....
17mm (IIRC) nut, then pound out the bolt. Use the nut threaded on to save the threads on the end of the bolt when you hammer it out. I've had to beat on them a few times, but that bolt will come out.
If you are refering to the torx bolts, they only hold the cover plate on, has nothing top do with the shifter.
17mm (IIRC) nut, then pound out the bolt. Use the nut threaded on to save the threads on the end of the bolt when you hammer it out. I've had to beat on them a few times, but that bolt will come out.
If you are refering to the torx bolts, they only hold the cover plate on, has nothing top do with the shifter.
#3
#4
#5
Thread
Thread Starter
Forum
Replies
Last Post