Another Explorer Seat Swap Question
#1
Another Explorer Seat Swap Question
Guys,
**YES I HAVE USED THE SEARCH BUTTON**
I recently got a good deal on some power/leather seats from a 1997 Explorer. After getting them wired and installed I found that one of the motors is bad in the drivers seat. I'm considering just tossing these seats and really spending some money for some great condition Explorer seats.
My question is "Will seats from an explorer 02 or NEWER fit in my truck without any modification?" I am 99% certain I have seen someone on these forums with 03 seats. I know seats from 01 or older will fit just fine, but I'd like to get newer ones if possible.
My tuck is a 1999 Super cab Ranger. As I said the seats from the 1997 Explorer fit and work just fine. I would just prefer the newer style of Explorer seats.
Any help is appreciated.
Thanks,
Mike
**YES I HAVE USED THE SEARCH BUTTON**
I recently got a good deal on some power/leather seats from a 1997 Explorer. After getting them wired and installed I found that one of the motors is bad in the drivers seat. I'm considering just tossing these seats and really spending some money for some great condition Explorer seats.
My question is "Will seats from an explorer 02 or NEWER fit in my truck without any modification?" I am 99% certain I have seen someone on these forums with 03 seats. I know seats from 01 or older will fit just fine, but I'd like to get newer ones if possible.
My tuck is a 1999 Super cab Ranger. As I said the seats from the 1997 Explorer fit and work just fine. I would just prefer the newer style of Explorer seats.
Any help is appreciated.
Thanks,
Mike
#3
Here's what will fit in the ranger's
98-01 Explorer 2 & 4 door leathers will fit
02+ Explorer Sport
02+ Sport Trac
02+ 4 doors are too wide and they have a different style rails.
I have 02+ Explorer Sport leather seats in my 04 extended cab. The only thing I had to modify was to make the holes bigger on the seat rails. I have power non heated so it was easy for me to wire up the drivers seat. Here's how they look:
98-01 Explorer 2 & 4 door leathers will fit
02+ Explorer Sport
02+ Sport Trac
02+ 4 doors are too wide and they have a different style rails.
I have 02+ Explorer Sport leather seats in my 04 extended cab. The only thing I had to modify was to make the holes bigger on the seat rails. I have power non heated so it was easy for me to wire up the drivers seat. Here's how they look:
The following users liked this post:
Texnewmex183645 (03-16-2024)
#4
I just got a 1998 ranger and I dont know alot about what seats will fit. My seat has a metal bar thats goes aross my lower back on the driver seat (thats not lumbar support). I was wanting to get some seats to replace them. I wanna know what seats or any make or year will fit my ranger? Im not real picky I just need somthing comfortable, or could I possibly swap the driver and passenger seat out?
#6
I just got a 1998 ranger and I dont know alot about what seats will fit. My seat has a metal bar thats goes aross my lower back on the driver seat (thats not lumbar support). I was wanting to get some seats to replace them. I wanna know what seats or any make or year will fit my ranger? Im not real picky I just need somthing comfortable, or could I possibly swap the driver and passenger seat out?
#7
quick question. i have a 95 and i'd like to replace my wore out gray cloth seats and i was wonder if ya'll know if the 98-01 applies to that or do i need to look for some leather explorer seats in the same gen as my truck? i know the newer ones will more than likely be nicer but i'm curious to know what i can get to easily do myself. if i can it'd be nice to go in with the leather seats and the center console to go with it. i'd also like to go in with the overhead console as well but i already know i can make it work but that's more of a finisher mod after i redo the interior and do a few other things i've been wantin to do.
#8
Is your truck a regular cab or extended cab? I know for sure that the explorer seat's won't fit a regular cab The rails are different and seats will make you sit high up in the cab. Also regardless of cab type it may be a little harder for you to fit a 98+ seat in a 95 but I'm not 100% on that. I think that the 98+ ranger and explorer rails are a little bit different. The front will line up but the rears will be off.
#10
My question is this, on my 04 it has air bag weight sensors in the seat, correct or whatever they are called (I know nothing when it comes to airbags)? What do you do if the seats you swap in do not have any? I am guessing that’s what they are, I know there is a plug that goes to the seat and I am assuming that’s what it is(my seats are not power, so that’s why I assume it has something to do with the air bag system).
I have leather explorer seats in my 93 reg. cab, so explorer seats will fit in a reg. cab, you just have to swap the tracks out.
I have leather explorer seats in my 93 reg. cab, so explorer seats will fit in a reg. cab, you just have to swap the tracks out.
#11
#12
02 Explorer Sport Seats in 2004 Ranger Ext Cab
So i bought 2002 Exp Sport seats. Cloth non power. Finally got the pretensioner bolted on and secured. went to mount in the truck and the holes on seat frames are too narrow and too short.
Do you have to take up carpet? How big of the hole did you all drill out? Drill bit size? I am worried that I am going to take off too much and I will get the seat wiggling.
Does anybody have pictures of the process? I am getting tired of messing with it. Anyhelp is appreciated!
Do you have to take up carpet? How big of the hole did you all drill out? Drill bit size? I am worried that I am going to take off too much and I will get the seat wiggling.
Does anybody have pictures of the process? I am getting tired of messing with it. Anyhelp is appreciated!
The following users liked this post:
Dakotamac (04-06-2022)
#14
#15
So i bought 2002 Exp Sport seats. Cloth non power. Finally got the pretensioner bolted on and secured. went to mount in the truck and the holes on seat frames are too narrow and too short. Do you have to take up carpet? How big of the hole did you all drill out? Drill bit size? I am worried that I am going to take off too much and I will get the seat wiggling. Does anybody have pictures of the process? I am getting tired of messing with it. Anyhelp is appreciated!
#16
#18
#19
Canadian Rangers
I'm a Canadian living in Ontario, I collect 4x4 Ford Rangers.
My latest score is a 2009 FX4 5 speed and it will have a Detroit locker in soon.
I also thinking of parting out 2004 FX4L22 a bit of a rust bucket.
Also 2007 Mazda B4000 4x4 5 speed
A 2003 FX4 level 2 likely a parts truck 5 speed
My latest score is a 2009 FX4 5 speed and it will have a Detroit locker in soon.
I also thinking of parting out 2004 FX4L22 a bit of a rust bucket.
Also 2007 Mazda B4000 4x4 5 speed
A 2003 FX4 level 2 likely a parts truck 5 speed
#21
Guys -I have a 1996 Ford Ranger Extended Cab. What year(s) Explorer seats (power/non-power) would directly bolt in (maybe with minor mods)? Or, would seats from a 2002 Ford Ranger Extended Cab also work? I am considering these two options.
Thanks! I am new to the forum and searched but didn't see any post that could point me in right direction, or I may have overlooked. My humble apologies, if this has been answered already .
Thanks! I am new to the forum and searched but didn't see any post that could point me in right direction, or I may have overlooked. My humble apologies, if this has been answered already .
#22
Guys -I have a 1996 Ford Ranger Extended Cab. What year(s) Explorer seats (power/non-power) would directly bolt in (maybe with minor mods)? Or, would seats from a 2002 Ford Ranger Extended Cab also work? I am considering these two options.
Thanks! I am new to the forum and searched but didn't see any post that could point me in right direction, or I may have overlooked. My humble apologies, if this has been answered already .
Thanks! I am new to the forum and searched but didn't see any post that could point me in right direction, or I may have overlooked. My humble apologies, if this has been answered already .
#23
2003 ranger with 2002 leather power explorer sport trac seats
I have a 2003 ranger put 2002 electric bucket seats but they didn't come with seat belts, my chime will not shut off and I do now know how to get it to stop also my airbag light is on I do have the original seats that were in the truck but do not want to take them apart
#24
Thread
Thread Starter
Forum
Replies
Last Post