Interior Semi-Tech General discussion of interior for the Ford Ranger.

Dreaded Door ajar, but with a twist

Thread Tools
 
Search this Thread
 
  #1  
Old 01-12-2007
moacsupreme's Avatar
Member
Thread Starter
Join Date: May 2006
Location: Chattanooga, TN
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Dreaded Door ajar, but with a twist

Well, when I bought my truck the owner said that sometimes the door dings. It didn't do it at the time I drove it so I didn't think much about it. The other day when I was leaving, the door started dinging....did it for about 5 minutes. The next time, about 15 minutes.

I've searched, and done the wd40 and lithium grease trick. I might add I got some weird looks while at advance shutting/opening my door repeatedly.

The thing is, sometimes it dings for a few minutes....which I believe indicates the driver side. Then sometimes, only the door ajar light is on...which from what I read indicates it's the passenger side. Then sometimes it's nothing. All in the same day. Are both switches bad/stuck? Or is it something else besides the switches.
 
  #2  
Old 01-12-2007
bwester04's Avatar
Member
Join Date: Mar 2006
Location: Round Rock, Tx
Posts: 2,641
Likes: 0
Received 0 Likes on 0 Posts
Do you have an extended cab 4 door or a 2 door? I've always found that slamming the rear doors keeps the door ajar light from coming on.
 
  #3  
Old 01-12-2007
5speedin2.3's Avatar
Member
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
mine did this until i took the switches out and cleaned em with alcohol and qtips.
they are a pain to get in and out..
 
  #4  
Old 01-12-2007
moacsupreme's Avatar
Member
Thread Starter
Join Date: May 2006
Location: Chattanooga, TN
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Mine is a 2 door extended cab. I read a ton of threads, which it seems like most people either had the dinging, or only the light. I don't recall seeing where anybody had both, which is what had me scratching my head.

I don't care to take the switches out and replace them, but I just wonder if they were the problem wouldn't it do the same thing every time?
 
  #5  
Old 01-12-2007
5speedin2.3's Avatar
Member
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by moacsupreme
Mine is a 2 door extended cab. I read a ton of threads, which it seems like most people either had the dinging, or only the light. I don't recall seeing where anybody had both, which is what had me scratching my head.

I don't care to take the switches out and replace them, but I just wonder if they were the problem wouldn't it do the same thing every time?
i guess it depends on the year of the truck, mine was just the light and two dings.
you can buy new switches or just clean the ones you have, i cleaned mine over a year ago and they still work fine.
 
  #6  
Old 01-12-2007
Join Date: Aug 2005
Location: Lowell, AR
Posts: 1,836
Likes: 0
Received 10 Likes on 10 Posts
After the switches, the door dinger circuits go directly into the board that houses the actual dinger. The only other circuit interruption is the fuse. Check to make sure your door dinger (maybe power-door lock circuit) fuse isn't loose or old. If it looks okay, it's probably time to pull the switches out and clean them meticulously...
 
  #7  
Old 01-13-2007
Rolldogg's Avatar
Member
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
Likes: 0
Received 3 Likes on 3 Posts
Clean'em or replace'em.......the only 2 options. They aren't that much from the dealership. I replaced both of mine.
 
  #8  
Old 01-13-2007
DaveO's Avatar
Member
Join Date: Nov 2006
Location: Chester, MA
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Needforspeed3685
After the switches, the door dinger circuits go directly into the board that houses the actual dinger. The only other circuit interruption is the fuse. Check to make sure your door dinger (maybe power-door lock circuit) fuse isn't loose or old. If it looks okay, it's probably time to pull the switches out and clean them meticulously...

Ok, so all I have is the "door ajar" light all the time. The dinger stops when I shut the driver door so that should mean that the driver side door switch is ok and it's the passenger door causing the door ajar light, right?
 
  #9  
Old 01-13-2007
xp1ik99's Avatar
Member
iTrader: (5)
Join Date: Feb 2006
Location: Lexington Park, MD
Posts: 3,230
Likes: 0
Received 2 Likes on 2 Posts
ya good question, my light is on all the time now, the interior light stays on for like a min after i turn the truck on, it used to go off but now the door ajar light just stays on all the time, kinda annoying, where are the door switches????
 
  #10  
Old 01-13-2007
5speedin2.3's Avatar
Member
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by DaveO
Ok, so all I have is the "door ajar" light all the time. The dinger stops when I shut the driver door so that should mean that the driver side door switch is ok and it's the passenger door causing the door ajar light, right?
yeah thats what mine was doing, i guess its from the passenger side door getting used less, i just took apart one side at a time and cleaned the switches.
they are clipped into the latch inside the door, its a pita to get it out.
i think you have to turn the switch and pull it but im not sure. been awhile.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRanger02
4.0L OHV & SOHC V6 Tech
16
12-15-2019 01:06 AM
mx98ranger
General Technical & Electrical
14
05-01-2017 07:54 AM
FordTough2007
Ford Snapshots & Videos
12
03-22-2012 10:51 PM
Old Black Cat
Suspension Tech
8
02-19-2008 10:58 PM
FMD
Auto Detailing 101
14
07-30-2006 11:31 AM



Quick Reply: Dreaded Door ajar, but with a twist



All times are GMT -6. The time now is 09:14 AM.