mustang seats
#2
RF Veteran
iTrader: (1)
Older seats, pre-2000, would come apart so you could swap tracks easier.
Not so on the 2000+ seats, tracks are welded to the seat bottoms, but can be cut off.
Width-wise you should be fine, i.e. the center console
But Mustang seat tracks will be too low for use in a Ranger so you need the Ranger tracks.
And not sure if their track widths are the same any more, they used to be, you will need to get the tape measure out
Not so on the 2000+ seats, tracks are welded to the seat bottoms, but can be cut off.
Width-wise you should be fine, i.e. the center console
But Mustang seat tracks will be too low for use in a Ranger so you need the Ranger tracks.
And not sure if their track widths are the same any more, they used to be, you will need to get the tape measure out
Thread
Thread Starter
Forum
Replies
Last Post
For Sale: Seats, seats, SEATS! NC
drppdyllwrngr
OLD - Interior, Exterior, Electrical, & Misc.
30
03-16-2010 07:38 PM
mtm
OLD - Interior, Exterior, Electrical, & Misc.
0
11-20-2009 10:39 AM