switching to power windows
#1
switching to power windows
im making a junkyard soon to replace my mirror. and was thinking of picking up the parts to do the power windows. what year should i pull the parts from. also how do i go about making power locks is it a lot more complicated than windows? the how to dosent go over it. thanks for any help.
#2
Old Guy User…
iTrader: (12)
Get the parts from as close to your truck as possible, my truck is an 03 and I found an 02, Lucky.
If you want everything to work as OEM then you need the GEM and other parts that I am not qualified to list.
There is a great How-To about using OEM parts but wiring them separate from the OEM Harness.
You get all of the OEM wiring you can from the donor truck but hook up a separate hot and grounds.
Try this: https://www.ranger-forums.com/interior-exterior-electrical-123/how-power-window-swap-using-oem-parts-118206/
Cory wrote a great How-To, kudos…
IF I can ever get my shop cleared (lazy) I will be following the above writeup.
If you want everything to work as OEM then you need the GEM and other parts that I am not qualified to list.
There is a great How-To about using OEM parts but wiring them separate from the OEM Harness.
You get all of the OEM wiring you can from the donor truck but hook up a separate hot and grounds.
Try this: https://www.ranger-forums.com/interior-exterior-electrical-123/how-power-window-swap-using-oem-parts-118206/
Cory wrote a great How-To, kudos…
IF I can ever get my shop cleared (lazy) I will be following the above writeup.
#5
Thread
Thread Starter
Forum
Replies
Last Post
AirborneRanger
Interior Semi-Tech
12
12-25-2010 08:04 PM
TexasRanger
General Ford Ranger Discussion
3
12-07-2008 04:03 PM
smokinedge
General Technical & Electrical
1
05-28-2008 06:02 PM