Interior switch
#1
#2
everything should be straight forward to remove. you'd need new plastic trees on the door panels and i'm not sure about the other interior parts. the only area that might be for the more experienced guys (not including me) would be the dash and cluster with all the wiring. you'd have to watch what went where.
#3
yeah, the headliner will be the least of your concerns. the dash will be the most time consuming part. make sure both trucks are the same body and # of doors.
you will probably want to strip all the wiring off the dash and only swap the dash pad itself. you just need to make sure you want to keep the right panels for your accessories IE fog lights, 4wd, etc.
i would plan a full weekend to do it.
you will probably want to strip all the wiring off the dash and only swap the dash pad itself. you just need to make sure you want to keep the right panels for your accessories IE fog lights, 4wd, etc.
i would plan a full weekend to do it.
Thread
Thread Starter
Forum
Replies
Last Post
FMD
General Technical & Electrical
9
05-08-2008 07:54 PM
lifted97ranger
General Technical & Electrical
60
03-22-2008 06:11 PM
Fx4wannabe01
General Technical & Electrical
9
10-06-2007 10:11 PM
Swoop1156
General Technical & Electrical
16
12-19-2005 08:42 PM