more paint
#26
Sorry to quote myself, but I was just wondering. Got the same paint in blue today, btw. Thanks for the inspiration.
#27
#32
IE: Primer, CP199, Metalcast? Or CP199 first?
#33
I did mine in a silver a few months before the truck was totaled. Here are the crap cell pics i have - i think these are the only ones i took of it.
I painted them at work so i had access to a ton of specialized adhesion promotors and stuff. It wasn't gonna come off.
#34
If you do use it, spray the adhesion promotor on the plastic, then spray the ground coat, then the colour and then clearcoat.
#35
#36
Sorry, I'm a noob at painting. Once I have the ground coat and a few coats of the Metalcast I should spray clearcoat too?
#38
Spray the adhesion promoter onto the clean bare plastic. Then do primer if you wish. Do a nice, even base of the grey ground coat. Make sure it's even, otherwise your colour will come out blotchy because the colour is transparent paint. When it's painted and dried, spray a couple coats of clear on it. Be really light with the clear coat, it will run easily.
#39
Spray the adhesion promoter onto the clean bare plastic. Then do primer if you wish. Do a nice, even base of the grey ground coat. Make sure it's even, otherwise your colour will come out blotchy because the colour is transparent paint. When it's painted and dried, spray a couple coats of clear on it. Be really light with the clear coat, it will run easily.
#41
Thread
Thread Starter
Forum
Replies
Last Post
paganwars
General Ford Ranger Discussion
12
01-29-2012 01:46 PM
Tys 4x4 FTW
General Ford Ranger Discussion
49
06-11-2009 06:32 PM