You'll need a T45(?) torx socket. Pull the plastic covers off the bottom of the jumpseat (they are held in with pressure clips) and then look at the side closest to the outside of the truck. Put your torx bit on an extension and stick it all the way back there and pull out that bolt holding the seatbelt in. Then fold the seat down and take out the 3 normal hex bolts and one torx bolt on the top of the bracket holding the seat in, and you're set. This is for a 4-door extended cab. I don't know how to pull the 2-door extended cab jumpseats.
2003 FX4 Level II. Twin Shifters. Black. A few mods here and there.
Originally Posted by SuperGildo@RRP
Kyle's a smart man.